SIEMENS ET 200SP, DI 8x24VDC HF, PU 1 6ES7131 6BF00 0CA0

The ET 200SP DI 8x24VDC HF, PU 1 6ES7131 6BF00 0CA0 is a high-quality industrial automation component designed for reliable performance. With a standard size and sleek black color, this rack-mountable product operates at a frequency of 50/60 Hertz (Hz), making it ideal for various industrial applications. Backed by a one-year warranty, this product ensures durability and efficiency in your automation processes. 

General Information

• Product type: DI 8x 24 V DC HF

• HW functional status: From FS07

• Firmware update: Yes

• BaseUnit: BU type A0

• Color code: CC01

• I&M data: Yes (I&M0I&M3)

• Isochronous mode: Yes

• PROFINET R1 support: Yes

Engineering Compatibility

• STEP 7 TIA Portal: From V13 SP1

• STEP 7: From V5.5

• PCS 7: From V8.1 SP1

• PCS neo: From V1.0

• PROFIBUS GSD: Revision 3 & 5+

• PROFINET GSDML: V2.3

Operating Modes

• Digital Input: Yes

• MSI: Yes

• Counter/Oversampling: No

Supply Voltage

• Rated voltage: 24 V DC

• Range: 19.2 28.8 V

• Reverse polarity protection: Yes

Input Current

• Rated consumption: 20 mA

• Max consumption: 39 mA

Encoder Supply

• Outputs: 8

• Min voltage: 19.2 V

• Short-circuit protection: Yes (per channel)

• Max current per channel: 700 mA

• Max current per module: 700 mA

Power Loss

• Typical: 1.5 W

Address Area

• Inputs: 1 byte (+1 byte for QI information)

Hardware Configuration

• Automatic encoding: Yes

• Mechanical coding: Type A

• Configurable submodules: Up to 4

Digital Inputs

• Number of inputs: 8

• Parameterizable: Yes

• Type 3 (IEC 61131): Yes

• Pulse extension: Yes (min. 4 s)

• Edge evaluation: Rising, falling, change

Input Voltage

• Rated value: 24 V DC

• Signal 0: 30 to +5 V

• Signal 1: +11 to +30 V

Input Current

• Typical (signal 1): 2.5 mA

Input Delay

• Parameterizable: 0.05 20 ms

• Min ON/OFF: 0.05 ms

Cable Length

• Shielded: Up to 1000 m

• Unshielded: Up to 600 m

Isochronous Mode

• Filtering time (min): 420 s

• Bus cycle time (min): 500 s

• Jitter (max): 8 s

Diagnostics & Status

• Diagnostic alarms: Yes (per channel)

• Hardware interrupt: Yes

• Supply voltage monitoring: Yes

• Encoder supply monitoring: Yes

• Wire-break detection: Yes

• Short-circuit: Yes

LED Indicators

• PWR (green) Supply OK

• Channel status (green)

• Channel diagnostics (red)

• Module diagnostics (green/red)

Isolation / Protection

• Potential separation:

  • Between channels: No

  • Channels backplane: Yes

  • Channels electronics supply: No

• Isolation test: 707 V DC

Environmental Data

• Operating temp (horizontal): 30 to +60 C

• Operating temp (vertical): 30 to +50 C

• Altitude: Up to 5000 m (derating >2000 m)

Dimensions

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

Weight

• Approx: 28 g

FAQs of ET 200SP, DI 8x24VDC HF, PU 1 6ES7131 6BF00 0CA0: