SINAMICS G120XA Rated power 500kW 3AC 380V -20% to 440V +10% Integrated class A C3 filter 110% 60s per 600s without Operator Panel Integrated Fieldbus: MODBUS RTU, BACnet MS/TP, USS 6DI, 4DQ, 2AI, 2AQ, 1Mot_t Protection: IP00 Frame Size: FSJ 1438x801x410 (HxWxD)

SINAMICS G120XA

Article No.: 6SL3225-1YD64-0CB0

Description: High-power 3-phase AC drive for industrial applications.

Rated Data

Input

• Number of phases: 3 AC

• Line voltage: 380 440 V 10% / -15%

• Line frequency: 47 63 Hz

• Rated current (LO): 959 A

Output

• Number of phases: 3 AC

• Rated voltage: 400 V

• Rated power (IEC 400V, LO): 500 kW

• Rated current (400 V): 881.53 A

• Rated current (380 V): 925 A

• Rated current (LO): 853 A

• Max. output current: 1,225 A

• Pulse frequency: 2 kHz

• Output frequency:

  • Vector control: 0 100 Hz

  • V/f control: 0 100 Hz

Overload Capability

• Low Overload (LO): 110% base load current for 60 s in 600 s cycle

General Technical Specs

• Power factor : 0.75 0.93

• Power factor cos : 0.99

• Efficiency : 0.98

• Sound pressure level (1m): 75.4 dB

• Power loss (typical): 10.1 kW

• Filter class: RFI suppression filter for Category C3

• EMC category: Category C3

• Safety function: Safe Torque Off without SIRIUS device

Communication

• USS, Modbus RTU, BACnet MS/TP

Inputs / Outputs

• Digital inputs: 6 (switching level 01: 11 V, 10: 5 V, max inrush 15 mA)

• Fail-safe digital inputs: 0

• Digital outputs (relay): 4, DC 30 V, 1 A

• Transistor outputs: 0

• Analog / digital inputs: 2 (Differential, 12-bit, switching 01: 4 V, 10: 1.6 V)

• Analog outputs: 2 (Non-isolated)

• PTC/KTY interface: 1 motor temp sensor input (PTC, KTY, PT1000, Thermo-Click, 5 C)

Closed-Loop Control Techniques

• V/f linear / square-law / parameterizable: Yes

• V/f with flux current control (FCC): Yes

• V/f ECO linear / square-law: Yes

• Sensorless vector control: Yes

• Vector control with sensor: No

• Encoderless torque control: Yes

• Torque control with encoder: No

Ambient Conditions

• Standard board coating: Class 3C2 (IEC 60721-3-3)

• Cooling: Air cooling, integrated fan

• Cooling air requirement: 0.345 m/s (12.183 ft/s)

• Installation altitude: 1,000 m

• Operating temperature: 0 60 C

• Transport temperature: -40 70 C

• Storage temperature: -25 55 C

• Relative humidity: Max 95% (no condensation or icing)

Connections

• Signal cable: 0.15 1.5 mm

• Line side / Motor end: M12 screw, 4 240 mm (MCM 4 500)

• DC link / PE connection: M12 screw

• Max motor cable length (shielded): 100 m

Mechanical Data

• Degree of protection: IP00

• Frame size: FSJ

• Net weight: 210 kg

• Dimensions: W 801 H 1,438 D 410 mm 

FAQs of SIEMENS VFD G120XA 6SL3225-2YD64-0CB0: