SIEMENS ET 200SP, RQ CO 4x 24V DC2A ST, VPE 1 6ES7132-6GD51-0BA0

About SIEMENS ET 200SP, RQ CO 4x 24V DC2A ST, VPE 1 6ES7132-6GD51-0BA0

Manufacturer SeriesS7 ET 200 CPU BRAND SIEMENS Product type designation RQ CO 4x24VDC/2A STSTEP 7 TIA Portal configurable/integrated from versionV14MODEL NAME/NUMBER6ES7132-6GD51-0BA0SIMATIC ET 200SP, Signal relay module, RQ CO 4x 24V DC/2A ST, 4 changeover contacts, isolated contacts, packing unit: 1 piece, fits to BU-type A0, Colour Code CC00, substitute value output, module diagnostics for: supply voltage 

Data sheet 6ES7132-6GD51-0BA0

SIMATIC ET 200SP Signal relay module

• RQ CO 4x 24V DC/2A ST, 4 changeover contacts, isolated contacts
• Packing unit: 1 piece
• Fits to BU-type A0
• Colour Code: CC00
• Substitute value output
• Module diagnostics for: supply voltage

General information

Product type designation: RQ CO 4x24VDC/2A ST
HW functional status: From FS02
Firmware version: V0.0

• FW update possible: No

Usable BaseUnits: BU type A0
Color code: CC00

Product function:

• I&M data: Yes (I&M0 to I&M3)

• Isochronous mode: No

Engineering with:

• STEP 7 TIA Portal: from V14

• STEP 7: from V5.5 SP3

• PROFIBUS: GSD Revision 3, 5 and higher

• PROFINET: GSDML V2.3

Operating mode:

• DQ: Yes

• DQ with energy-saving: No

• PWM: No

• Oversampling: No

• MSO: No

Redundancy:

• Redundancy capability: Yes

Supply voltage

• Rated value (DC): 24 V

• Permissible range: 19.2 28.8 V

• Reverse polarity protection: Yes

Input current

• Current consumption (rated): 50 mA

Power loss

• Typical: 1.2 W

Address area

• Inputs: +1 byte for QI information

• Outputs: 1 byte

Hardware configuration

• Automatic encoding: Yes

• Mechanical coding element: Yes

• Type: C

Digital outputs

• Type: Relays

• Number of outputs: 4

• Current-sinking: Yes

• Current-sourcing: Yes

• Parameterizable: Yes

• Short-circuit protection: No

Parallel switching:

• For logic links: Yes

• For uprating: No

• For redundant load control: Yes

Switching frequency (max): 2 Hz (resistive load)

Current limits:

• Per channel: max. 2 A

• Per module: max. 8 A

Thermal limits (per module)

Horizontal installation:

• Up to 40C: 8 A

• Up to 50C: 6 A

• Up to 60C: 4 A

Vertical installation:

• Up to 30C: 8 A

• Up to 40C: 6 A

• Up to 50C: 4 A

Relay outputs

• Number: 4

• Relay coil rated supply: 24 V DC

• Max coil current (all relays): 40 mA

• Operating cycles (max): 500,000

Switching capacity:

• Resistive load: 2 A

• Continuous current: 2 A

• Minimum switching current: 1 mA (5 V DC)

• Rated switching voltage: 24 V DC / 24 V AC

Cable length

• Shielded: max. 1000 m

• Unshielded: max. 200 m

Diagnostics

• Diagnostic function: Yes

• Substitute values: connectable

• Diagnostic alarm: Yes

Monitoring:

• Supply voltage: Yes

• Wire break: No

• Short-circuit: No

LED indicators:

• PWR LED (supply): Green

• Channel status: Green LED

• Channel diagnostics: No

• Module diagnostics: Green/red DIAG LED

Potential separation

• Between channels: Yes

• Between channels & backplane bus: Yes

• Between channels & electronics supply: Yes

Isolation:

• Tested with 707 V DC

Standards / Approvals

• Suitable for safety functions: No

Ambient conditions

Horizontal installation:

• 30C +60C

Vertical installation:

• 30C +50C

Max installation altitude: 2000 m (higher on request)

Dimensions

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

Weight

• Approx.: 30 g

Technical Details