SIEMENS ET 200SP AI 2 X UI 2-, 4-Wire HF 6ES7134-6HB00-0CA1

The SIEMENS ET 200SP AI 2 X UI 2-, 4-Wire HF (6ES7134-6HB00-0CA1) is a versatile automation module designed for efficient process control. Compact in structure, with dimensions of 15 x 75 x 58 mm and lightweight at only 32 grams, it is ideal for space constraints and portability needs. Built for DIN-rail mounting, it operates reliably within a temperature range of -30C to +60C and is designed to withstand up to 95% humidity. Equipped with an input current of 39 mA and a power rating of 0.95 W, this module ensures low energy consumption. Its rated voltage is 24V DC, and its output type supports up to 20 mA, making it versatile for various industrial applications. With an IP20 protection level, it offers robust safety in controlled environments. Its frequency range of 50/60 Hz supports consistent operation, while an isolation capacity of 707V DC enhances reliability. The sleek black color adds to its professional aesthetic appeal.

General Information

• Product Type: AI 2x U/I 2-/4-wire High Feature

• Hardware Status: From FS06

• Firmware Update: Supported

• Compatible Base Units: BU Type A0, A1

• Color Code: CC03

Engineering

• TIA Portal: From V13

• STEP 7: V5.5 or higher

• PCS 7: V8.1 SP1

• PROFINET GSDML: V2.3

• PROFIBUS GSD: Revision 3 & 5

Operating Features

• Isochronous Mode: Yes

• Oversampling: No

• MSI: Yes

• Reparameterization in RUN: Yes

• Calibration in RUN: Yes

Supply Voltage

• Rated Voltage: 24 V DC

• Range: 19.228.8 V DC

• Reverse Polarity Protection: Yes

Current & Encoder Supply

• Module Current Consumption: 39 mA (without sensor supply)

• 24 V Encoder Supply:

  • Short-circuit protected

  • Output Current: 20 mA (normal), up to 50 mA (<10 s)

• Additional Encoder Supply (4-wire):

  • Short-circuit protected

  • Output Current: 100 mA (normal), up to 150 mA (<10 s)

Power Loss

• Typical: 0.95 W (without sensor load)

Address Area

• Max Address Size: 4 bytes

• Extra: +4 bytes scaling, +1 byte QI info

Analog Inputs

• Number of Inputs: 2 (Differential)

• Supports: Voltage & Current

• Max Input Voltage: 30 V

• Max Input Current: 50 mA

Voltage Ranges

Current Ranges

Cable Length

• Shielded: 1000 m

• Voltage Measurement: 200 m

Measurement & Conversion

• Measurement Principle: Sigma-Delta

• Resolution: max. 16 bit (with sign)

• Integration Time Options: 0.625 to 67.5 ms

• Basic Module Execution Time: 1 ms

• Smoothing Levels: 0 / 2 / 4 / 8 / 16 / 32

Encoder Connection

• Voltage measurement: Yes

• Current 2-wire transmitter: Yes (max burden 650 )

• Current 4-wire transmitter: Yes

Accuracy

• Linearity Error: 0.01%

• Temperature Drift: 0.003%/K

• Repeat Accuracy: 0.01%

• Operational Error: 0.1% (voltage/current)

Diagnostics & Alarms

• Diagnostic functions: Yes

• Diagnostic Alarms: Yes

• Limit Value Alarms: 2 upper + 2 lower

• Supply Monitoring: Yes

• Wire-break Detection: Yes (420 mA only)

• Short-Circuit Detection: Yes

• Group Error: Yes

• LEDs:

  • PWR (green)

  • Channel (green/red)

  • DIAG (green/red)

Isolation / Potential Separation

• Between Channels: Yes

• Channels Backplane Bus: Yes

• Channels Electronics Supply: Yes

• Isolation Test Voltage: 707 V DC

Environmental Conditions

• Operating Temperature:

  • Horizontal: 30 to +60 C

  • Vertical: 30 to +50 C

• Max Altitude: 5000 m

Mechanical Data

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: ~32 g

Technical Details 

FAQs of SIEMENS ET 200SP AI 2 X UI 2-, 4-Wire HF 6ES7134-6HB00-0CA1: