SIEMENS ET 200SP, AI 4XI 2-4-Wire ST, PU 1 6ES7134-6GD01-0BA1

About SIEMENS ET 200SP, AI 4XI 2-4-Wire ST, PU 1 6ES7134-6GD01-0BA1

Brand Siemens Manufacturer Series SIMATIC ET 200SPSTEP 7 TIA Portal configurable/integrated from versionV14Model Name/Number6ES7134-6GD01-0BA1Product type designationAI 4xI 2-/4-wire ST SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%  

General Information

• Product Type: AI 4xI 2-/4-wire Standard

• HW Functional Status: FS02

• Firmware Update: Yes

• Base Units: BU type A0, A1

• Color Code: CC03

• I&M Data: Yes (I&M0 to I&M3)

• Isochronous Mode: No

Engineering & Configuration

• STEP 7 TIA Portal: V14 or higher

• STEP 7: V5.6 or higher

• PCS 7: V8.1 SP1

• PROFIBUS: GSD Revision 3 & 5+

• PROFINET: GSDML V2.3

• Reparameterization in RUN: Yes

• Calibration in RUN: No

Supply & Power

• Rated Voltage: 24 V DC

• Permissible Range: 19.2 28.8 V DC

• Reverse Polarity Protection: Yes

• Max Current Consumption: 37 mA (without sensor supply)

• 24 V Encoder Supply: Yes, short-circuit protected, max 20 mA (50 mA < 10 s)

• Power Loss (typical): 0.85 W

Address & Hardware

• Address Space: Max 8 bytes + 1 byte QI info

• Mechanical Coding: Type A

• Connection Variants: 2-wire or 4-wire (BU type A0, A1)

Analog Inputs

• Number of Inputs: 4 (differential)

• Input Ranges:

  • 0 20 mA, 16-bit incl. sign, 100 input resistance

  • -20 +20 mA, 100

  • 4 20 mA, 15-bit, 100

• Cycle Time (per channel): 180 / 60 / 50 ms

• Measurement Principle: Sigma-Delta

• Resolution: Max 16-bit

• Smoothing Levels: 4 (parameterizable)

• Interference Suppression: 16.6 / 50 / 60 Hz

Encoder Support

• Voltage Measurement: No

• Current Measurement 2-wire/4-wire: Yes

• 2-wire Transmitter Burden Max: 650

Accuracy

• Linearity Error: 0.01%

• Temperature Error: 0.005%/K

• Crosstalk: Min. 50 dB

• Repeat Accuracy: 0.05%

• Operational Error Limit (Overall Temp): 0.5%

• Basic Error Limit (25C): 0.3%

Diagnostics & Status

• Diagnostics Function: Yes

• Alarms: Diagnostic alarm Yes, Limit value alarm No

• Wire-break Detection: Yes (4-20 mA)

• Short-circuit Detection: Yes (2-wire mode)

• LED Indicators:

  • PWR (green), Channel status (green), Module diagnostics (green/red)

Isolation & Potential Separation

• Between Channels: Yes (2-wire / 4-wire groups)

• Between Channels & Backplane Bus: Yes

• Between Channels & Power Supply: Yes (only 4-wire)

• Max Potential Difference (UCM): 10 V DC

• Isolation Test: 707 V DC

Ambient Conditions

• Operating Temp: Horizontal: -30 60 C (FS02: <0 C), Vertical: -30 50 C

• Altitude Max: 5,000 m

Dimensions & Weight

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: 31 g 

Technical Details