The ET 200SP, DI 8x24VDC High Speed 6ES7131 6BF00 0DA0 is a versatile industrial automation solution suitable for various applications. Operating at a frequency of 50/60 Hertz (HZ), this rack-mountable device in a sleek grey color offers high-speed performance with 8 digital inputs at 24VDC. Built with high-quality features and a standard size, it ensures reliable and efficient operation in industrial settings.

Data Sheet 6ES7131-6BF00-0DA0

SIMATIC ET 200SP Digital Input Module (DI 8x 24 V DC High Speed)
Pack quantity: 1 unit
Operating modes: DI, Oversampling, 4x Counters
Suitable for BU type A0
Color code: CC01

General Information

• Product type: DI 8x24 V DC HS

• HW functional status: From FS04

• Firmware version: V1.0.2

• FW update possible: Yes

• Usable BaseUnits: BU type A0

• Color code: CC01

Product Functions

• I&M data: Yes (I&M0 to I&M3)

• Isochronous mode: Yes

• Suitable for PROFINET R1 IMs: Yes

Engineering

• STEP 7 TIA Portal: From V13 SP1

• STEP 7: From V5.5 SP3

• PCS 7: From V10.0

• PCS neo: From V3.1.1

• PROFIBUS GSD: Revision 3, 5 and higher

• PROFINET GSDML: V2.3

Operating Modes

• DI: Yes

• Counter: Yes (max. 4 counters)

• Oversampling: Yes

• MSI: No

Supply Voltage

• Rated value: 24 V DC

• Range: 19.2 28.8 V DC

• Reverse polarity protection: Yes

Input Current

• Max. consumption: 70 mA (without sensor supply)

Encoder Supply (24 V)

• 24 V supply: Yes

• Short-circuit protection: Yes (per module)

• Max. output current: 700 mA

Power Loss

• Typical: 1.5 W

Address Area

• Max. per module: 45 bytes

• Inputs:

  • DI mode: 1 byte + 1 byte QI

  • Oversampling: 32 bytes

  • Counter mode: 25 bytes

• Outputs:

  • Counter mode: 20 bytes

Hardware Configuration

• Automatic encoding: Yes

• Mechanical coding element: Yes (Type A)

BaseUnit Connection Options

• 1-wire: BU type A0

• 2-wire: BU type A0

• 3-wire: BU type A0 with AUX terminals

• 4-wire: BU type A0 + potential distributor module

Digital Inputs

• Number of inputs: 8

• Input type: P-reading

• Pulse extension: Yes (50 ms 2 s)

Technological Functions

• Gate start/stop: Yes

• Free digital input: Yes

• Counter:

  • Max. counters: 4

  • Max. frequency: 10 kHz

  • Width: 32 bit

  • Direction: Up/Down

• Oversampling:

  • Max. channels: 8

  • Values per cycle: 32

  • Min. resolution: 7.8125 s

Input Voltage

• Rated value: 24 V DC

• Signal 0: 30 to +5 V

• Signal 1: +11 to +30 V

Input Current

• Signal 1 (typ): 6 mA

Input Delay (parameterizable)

• Standard inputs: 0 / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms

• Interrupt inputs: Yes (parameterizable)

• Technological functions: Yes

Cable Length

• Shielded: Max. 50 m

• Unshielded: Max. 50 m

Encoder Compatibility

• 2-wire sensors: Yes

• Max quiescent current: 1.5 mA

Isochronous Mode

• Min. cycle time: 125 s

• Jitter max.: 5 s

Diagnostics

• Diagnostic functions: Yes

• Diagnostic alarm: Yes

• Hardware interrupt: Yes

• Supply voltage monitoring: Yes

• Encoder supply monitoring: Yes

• Short-circuit: Yes

• Wire break: No

LED Indicators

• PWR (green): Yes

• Channel status (green): Yes

• Module diagnostics (green/red): Yes

Potential Separation

• Between channels: No

• Channels backplane bus: Yes

• Channels electronics supply: No

• Isolation tested at 707 V DC

Environmental Data

• Horizontal: 30 C to +60 C

• Vertical: 30 C to +50 C

• Installation altitude: Up to 5000 m

Dimensions & Weight

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: approx. 28 g

FAQs of ET 200SP, DI 8x24VDC High Speed 6ES7131 6BF00 0DA0: