SIEMENS ET 200SP, DQ 16x 24V DC0,5A ST, PU 1 6ES7132-6BH01-0BA0

About SIEMENS ET 200SP, DQ 16x 24V DC0,5A ST, PU 1 6ES7132-6BH01-0BA0

Manufacturer: Siemens

Series: S7 ET 200 CPU

Model Number: 6ES7132-6BH01-0BA0

Product Type: Digital Output Module (DQ 16x 24 V DC / 0.5 A ST)

TIA Portal Compatibility: Configurable from version V14

• SIMATIC ET 200SP digital output module

• 16x 24 V DC, 0.5 A standard, source output (PNP, P-switching)

• Packing unit: 1 piece

• Fits BU-type A0

• Colour Code: CC00

• Features module diagnostics: short-circuit to L+ and ground, wire break, and supply voltage monitoring

• Substitute value output

SIMATIC ET 200SP Digital Output Module DQ 16x24V DC/0.5A

• Article No.: 6ES7132-6BH01-0BA0
• Type: Source Output (PNP, P-switching)
• Base Unit Compatibility: BU type A0
• Color Code: CC00
• Packing Unit: 1 piece

General Information

• HW Functional Status: FS03

• Firmware Version: V0.0 (No FW update possible)

• I&M Data: Yes (I&M0 to I&M3)

• STEP 7 TIA Portal Compatible: V14 or higher

• STEP 7 Compatible: V5.5 SP3 or higher

• PCS 7 Compatible: V8.1 SP1 or higher

• PROFIBUS: GSD file revision 3 and 5+

• PROFINET: GSDML V2.3

Supply Voltage

• Rated Value: 24 V DC

• Permissible Range: 19.2 28.8 V

• Reverse Polarity Protection: Yes

• Max. Current Consumption (without load): 60 mA

Digital Outputs (DQ)

• Number of Outputs: 16

• Type: Source (PNP, current-sourcing)

• Short-Circuit Protection: Yes (typ. 1 A, 0.71.3 A)

• Open-Circuit Detection: Yes

• Inductive Shutdown Voltage: Typ. L+ (-50 V)

• Controlling a Digital Input: Yes

• Switching Capacity:

  • Resistive Load: max. 0.5 A

  • Lamp Load: max. 5 W

• Load Resistance Range: 48 12 k

• Output Current:

  • Rated: 0.5 A

  • Residual (Signal 0): max. 0.1 mA

• Output Delay (Resistive Load):

  • "0""1": typ. 50 s

  • "1""0": typ. 100 s

• Parallel Switching: Redundant control possible (no uprating)

• Max Switching Frequency:

  • Resistive Load: 100 Hz

  • Inductive Load: 2 Hz

  • Lamp Load: 10 Hz

• Total Current per Module: max. 8 A

• Total Current per Channel: max. 0.5 A

• Max Cable Length:

  • Shielded: 1,000 m

  • Unshielded: 600 m

Diagnostics & Status

• Substitute Values Connectable: Yes

• Diagnostic Alarms: Yes

• Monitored Functions: Supply Voltage, Wire Break, Short-Circuit to L+, Short-Circuit to M, Group Error

• LEDs:

  • PWR LED (green) Supply Voltage

  • Channel Status (green)

  • Module Diagnostics (green/red DIAG LED)

Potential Separation & Isolation

• Between Channels: No

• Between Channels and Backplane Bus: Yes

• Isolation Tested: 707 V DC

Ambient Conditions

• Horizontal Installation: -30 60 C

• Vertical Installation: -30 50 C

• Max Installation Altitude: 5,000 m (restrictions above 2,000 m)

Mechanical Data

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: approx. 30 g 

Technical Details