SIEMENS ET 200SP, DQ 16X24VDC0,5A BA, PU 1 6ES7132 6BH00 0AA0

The ET 200SP, DQ 16X24VDC0,5A BA, PU 1 6ES7132 6BH00 0AA0 is a high-quality industrial automation device designed to operate at a frequency of 50/60 Hertz (HZ). This standard-sized rack mount module comes in a sleek grey color, perfect for integrating seamlessly into industrial automation systems. As a reliable exporter, manufacturer, supplier, and trader, this product ensures optimal performance and durability for various automation applications. 

Siemens SIMATIC ET 200SP Digital Output Module DQ 16x24VDC/0.5A Basic

• Part Number: 6ES7132-6BH00-0AA0
• Pack Quantity: 1 Unit
• Base Unit Type: A0
• Color Code: CC00

General Information

• HW Functional Status: From FS03

• Firmware Version: V0.0 (FW update not possible)

• I&M Data: Yes (I&M0 to I&M3)

• Isochronous Mode: No

• Engineering:

  • STEP 7 TIA Portal: from V14

  • STEP 7: V5.5 or higher

  • PROFIBUS: GSD Revision 3 and higher

  • PROFINET: GSDML V2.3

Operating Mode

• DQ: Yes

• DQ with Energy-Saving: No

• PWM: No

• Oversampling: No

• MSO: No

Supply Voltage

• Rated Value (DC): 24 V

• Permissible Range: 19.2 28.8 V DC

• Reverse Polarity Protection: Yes

• Input Current (Max, no load): 55 mA

Power Loss

• Typical: 1 W

Address Area

• Outputs: 2 Bytes

Hardware Configuration

• Automatic Encoding: Yes

• Mechanical Coding Element: Type A

• BaseUnit Connection Options: 1-wire, 2-wire, 3-wire, 4-wire (with potential distributor module)

Digital Outputs

• Type: Source Output (PNP, current-sourcing)

• Number of Outputs: 16

• Current-Sinking: No

• Current-Sourcing: Yes

• Parameterizable: Yes

• Short-Circuit Protection: Yes (Response threshold typ. 1.4 A, 0.71.9 A)

• Open-Circuit Detection: No

• Inductive Shutdown Voltage Limit: Typ. L+ (-53 V)

• Can control a digital input: Yes

Switching Capacity

• Resistive Load: Max 0.5 A

• Lamp Load: Max 5 W

• Load Resistance Range: 48 100 k

Output Current

• Signal 1: Rated 0.5 A

• Signal 0: Residual Max 30 A

Output Delay (Resistive Load)

• 0 1: Typ 80 s, Max 150 s

• 1 0: Typ 100 s, Max 200 s

Parallel Switching

• Uprating: No

• Redundant Control: Yes

Switching Frequency

• Resistive Load: Max 100 Hz

• Inductive Load: Max 2 Hz

• Lamp Load: Max 10 Hz

Total Current

• Per Channel: Max 0.5 A

• Per Module: Max 8 A

• Horizontal Installation (60C): Max 8 A

• Vertical Installation (50C): Max 8 A

Cable Length

• Shielded: Max 1000 m

• Unshielded: Max 600 m

Diagnostics / Status

• Diagnostics Function: Yes

• Substitute Values Connectable: Yes

• Diagnostic Alarm: Yes

• Monitoring Supply Voltage: Yes

• Group Error: Yes

• LED Indicators:

  • PWR LED (green)

  • Channel Status LED (green)

  • Module Diagnostics LED (green/red DIAG)

Potential Separation

• Between Channels: No

• Between Channels and Backplane Bus: Yes

Isolation Tested: 707 V DC (Type Test)

Standards / Certificates

• Suitable for Safety Functions: No

• Environmental Product Declaration: Yes

• Global Warming Potential:

  • Total: 29.3 kg CO2 eq

  • Production: 3.98 kg

  • Operation: 25.6 kg

  • End of Life: -0.245 kg

Ambient Conditions

• Operating Temp:

  • Horizontal: -30C 60C

  • Vertical: -30C 50C

• Maximum Installation Altitude: 5000 m (restrictions above 2000 m)

Dimensions & Weight

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: 30 g

FAQs of ET 200SP, DQ 16X24VDC0,5A BA, PU 1 6ES7132 6BH00 0AA0: