The Siemens ET 200SP F-DQ 4x24VDC2A PM HF (6ES7136-6DB00-0CA0) is a highly efficient module designed for automation systems. Featuring a compact design, it measures 15 x 73 x 58 mm and weighs only 57 grams, ensuring easy DIN-rail mounting. Operating within a temperature range of -20C to +60C, this module guarantees reliable performance in diverse environments. With an IP20 protection rating, the device is perfect for safe indoor applications. It operates on a 24V DC rated voltage and has an input current of 75 mA and low power dissipation of 70 mW, making it energy-efficient. Additionally, it can handle humidity levels of up to 95%, making it durable even in challenging conditions. The module is designed to operate at frequencies of 50/60 Hz, making it suitable for global automation applications. Its bright yellow casing ensures quick identification during installation or troubleshooting.

General Information

• Product Type: F-DQ 4x24VDC/2A PM HF

• BaseUnit: BU Type A0

• I&M Data: I&M0 to I&M3

Engineering

• TIA Portal: From V12

• STEP 7 Classic: From V5.5 SP3

• PROFINET GSD: V2.31

Supply Voltage

• Rated Voltage: 24 V DC

• Range: 19.2 28.8 V DC

• Reverse Polarity Protection: Yes

• NEC Class 2: Not required

Input Current

• Rated Consumption: 75 mA (without load)

• From Backplane Bus: Max 21 mA

Output Voltage (Header)

• 24 V DC

Power

• Backplane Bus Consumption: 70 mW

• Power Loss (typical): 4 W

Address Area

• Inputs: 5 bytes

• Outputs: 5 bytes

Hardware

• Automatic module encoding

• Electronic coding: Type F

Digital Outputs

• Type: Transistor

• Quantity: 4

• Parameterizable: Yes

• Short-Circuit Protection: Yes (threshold > 3.3 A)

• Open-Circuit Detection: Yes (threshold ~8 mA)

• Overload Protection: Yes (threshold ~2.9 A)

• Inductive Shutdown Voltage Limit: Typ. 2 47 V

• Input Control: IEC 61131-2 Type 2

Output Performance

• Max Resistive Load: 2 A

• Lamp Load: Max 10 W

• Load Resistance: 12 to 2000

Output Voltage

• Signal "1": Min 24 V (L+ 0.5 V)

Output Current

• Signal "1": 2 A

• Residual current (signal "0"): Max 0.5 mA

Switching Frequency

• Resistive Load: Max 30 Hz

• Inductive Load: Max 0.1 Hz

• Lamp Load: Max 10 Hz

Current Limits

• Per Channel: Max 2 A

• Per Module: Max 6 A

Cable Length

• Shielded: Max 1000 m

• Unshielded: Max 500 m

Diagnostics & Status

• Diagnostics available

• Diagnostic alarms supported

• LEDs:

  • RUN (green)

  • ERROR (red)

  • PWR (green)

  • Channel Status (green)

  • Channel Diagnostics (red)

  • DIAG Module LED (green/red)

Isolation / Potential Separation

• Between channels: No

• Channels Backplane Bus: Yes

• Channels Electronics Power: No

• Dielectric Test: 707 V DC

Safety Performance

• Suitable for safety functions

• Performance Level: PL e

• SIL Level: SIL 3

Probabilities (20-year lifetime)

• SIL2 PFDavg: < 2.010

• SIL3 PFDavg: < 2.010

• SIL2 PFH: < 1.010 /h

• SIL3 PFH: < 1.010 /h

Environmental Conditions

• Operating temperature:

  • Horizontal: 0C to 60C

  • Vertical: 0C to 50C

• Altitude: Up to 4000 m

Mechanical Data

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: ~57 g

Technical Details 

FAQs of SIEMENS ET 200SP, F-DQ 4x24VDC2A PM HF 6ES7136-6DB00-0CA0: