SIEMENS ET 200SP, F-TM Count 1x1Vpp sincos HF 6ES7136-6CB00-0CA0

The SIEMENS ET 200SP, F-TM Count 1x1Vpp sincos HF (Model: 6ES7136-6CB00-0CA0) is a highly efficient automation module engineered for precise performance in industrial environments. Designed for ease of installation with DIN-rail mounting, it is compact with dimensions of 15 x 73 x 58 mm and lightweight at just 42 grams. Operating on a rated voltage of 24V DC, it optimizes energy efficiency with an input current of 50mA and low power loss of 1.25W. This module features an IP20 protection level, operating reliably in temperatures ranging from -20C to +60C and a humidity tolerance of up to 95%. It delivers dynamic output capability up to 300mA with a frequency range of 50/60Hz and insulation of 707V DC, ensuring safety and stability. Its black housing complements industrial aesthetics while providing robust functionality. Ideal for advanced automation tasks, this product excels in high-frequency sincos signals and facilitates seamless integration into existing systems.

General Information

• Product Name: F-TM Count 1x1Vpp sin/cos HF

• Firmware Version: V1.0 (FW update possible)

• BaseUnit Type: BU type A0

• Color Code: CC01

• I&M Data: I&M0 I&M3

• TIA Portal Support: STEP 7 V17 or higher (use GSDML for earlier versions)

Supply Voltage

• Rated Voltage: 24 V DC

• Permitted Range: 20.4 28.8 V DC

• Reverse Polarity Protection: Yes

• NEC Class 2 Supply Required: No

Input Current / Encoder Supply

• Module Current Consumption: Max. 50 mA (without load), 150 mA with 300 mA encoder load

• Encoder Supply: 5.1 V 3.5%

• Short-Circuit Protection: Yes (electronic)

• Max Output Current: 300 mA

Power Loss

• Typical Power Loss: 1.25 W

Address Area

• Input Address Size: 14 bytes (13 bytes for S7-300/400F)

• Output Address Size: 5 bytes (4 bytes for S7-300/400F)

Digital Inputs

• Number of Inputs: 1 (counter input)

• Parameterizable: Yes

• Functions:

  • Gate start/stop

  • Incremental encoder counter

Input Specifications

• Input Signal Type: sin/cos 1 Vpp

• Minimum Pulse Width: 2.5 s (no filtering)

• Cable Length (shielded): Max. 150 m

Encoder Support

• Incremental Encoder (symmetrical): Yes

• Encoder Voltage: 1 Vpp centered at 2.5 V

• Max Input Frequency: 200 kHz

• Max Counting Frequency: 800 kHz (quadruple evaluation)

• Supported Signals: A/B (90), A/B + Zero

Diagnostics & Indicators

• Diagnostic Functions: Yes

• Alarms: Diagnostic alarm

• Monitoring:

  • Supply voltage

  • Wire break

  • Short-circuit

  • A/B transition error

• LEDs:

  • RUN (green)

  • ERROR (red)

  • PWR (green)

  • Channel status (green)

  • Channel diagnostics (red)

  • Module diagnostics (green/red)

Integrated Functions

• Counter Channels: 1

• Max Counting Frequency: 800 kHz

• Counting Modes: Continuous, parameterizable

• Gate Control: Software gate

• Counting Range: Parameterizable

Measuring Functions

• Frequency Measurement: 0.04 Hz to 800 kHz

• Cycle Measurement: 1 s to 25 s

• Velocity Range: 0 to 2,147,483 (scaled units)

• Accuracy: Up to 100 ppm (depends on signal and interval)

Safety Functions (PROFIsafe)

• Safe Operating Stop (SOS)

• Safely-Limited Speed (SLS)

• Safe Direction (SDI)

• Safe Speed Monitor (SSM)

Safety Ratings

• Performance Level: Cat. 4, PLe (ISO 13849-1)

• SIL Rating: SIL 3 (IEC 61508)

Potential Isolation

• Channel Backplane Bus: Yes

• Channel L+ / Electronics Supply: No

• Type Test Voltage: 707 V DC

Environmental Conditions

• Operating Temperature (Horizontal): 0C to 60C

• Operating Temperature (Vertical): 0C to 55C

• Altitude: >2000 m on request

Dimensions & Weight

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: ~42 g

Technical Details 

FAQs of SIEMENS ET 200SP, F-TM Count 1x1Vpp sincos HF 6ES7136-6CB00-0CA0: