About

Manufacturer SeriesS7 ET 200 CPU BRAND SIEMENS Product type designation DQ 4x24 V DC/2 A HSSTEP 7 TIA Portal configurable/integrated from version STEP 7 V15.1 or higher MODEL NAME / NUMBER6ES7132-6BD20-0DA0SIMATIC ET 200SP, digital output module, DQ 4x 24 V DC/2A High Speed, Pack quantity: 1 unit suitable for BU type A0, Color code CC00, 3 alternative operating modes: DQ, Oversampling, PWM Module diagnostics 

Siemens SIMATIC ET 200SP

Digital Output Module DQ 4x24 V DC / 2 A High Speed (HS)

Article No.: 6ES7132-6BD20-0DA0

• 4 digital outputs

• High-speed operation

• 3 alternative operating modes: DQ, Oversampling, PWM

• Module diagnostics included

• Suitable for BaseUnit: BU type A0

• Color code: CC00

General Information

• HW functional status: From FS05

• Firmware version: Updatable (FW update possible)

• I&M data: I&M0 to I&M3

• Isochronous mode: Yes (DQ and Oversampling only)

• Engineering:

  • STEP 7 TIA Portal: V15.1 or higher

  • STEP 7: via GSD from V5.6 HF4

  • PROFIBUS: GSD revision 3 and higher

  • PROFINET: GSDML V2.33

Operating Mode

• DQ, DQ with energy-saving (Valve control), PWM, Cam control, Oversampling

• MSO: No

Supply Voltage

• Rated: 24 V DC

• Permissible range: 19.2 … 28.8 V DC

• Reverse polarity protection: Yes

• Max input current: 50 mA (without load)

Digital Outputs

• Type: Source output (PNP, current-sourcing)

• Number of outputs: 4

• Current per channel: Max 2 A

• Current per module: Max 8 A (temperature-dependent, see table below)

• Short-circuit protection: Yes (typ. 6 A)

• Inductive shutdown voltage limit: -1 V

• Controllable via digital input: No

• Parameterizable outputs: Yes

• PWM output: Max 4 channels, cycle duration configurable, resolution 0.1%

• Oversampling output: Max 4 channels, values per cycle max 32, min. resolution 100 µs

• Switching capacity: Max 2 A resistive load, max 10 W lamp load

• Load resistance range: 12 … 3400 Ω

• Output delay (resistive load): 0→1 max 1 µs, 1→0 max 1 µs

• Switching frequency: Resistive / inductive / lamp load: max 5 kHz

Max module current vs. temperature (DQ mode, horizontal installation)

• ≤30°C: 8 A

• ≤40°C: 6.9 A

• ≤50°C: 4.7 A

• ≤60°C: 2.5 A

Vertical installation:

• ≤30°C: 7.2 A

• ≤40°C: 5.6 A

• ≤50°C: 4 A

Cable Length

• Shielded: Max 50 m

• Unshielded: Max 50 m

Isochronous Mode

• Execution and activation time (TCO), min: 40 μs

• Bus cycle time (TDP), min: 125 μs

• Jitter, max: 1 μs

Diagnostics & Status

• Diagnostics function: Yes

• Substitute values: Connectable

• Alarms: Diagnostic alarm Yes

• Monitoring: Supply voltage Yes, Short-circuit Yes (module-wise), Group error Yes

• LED indicators:

  • PWR: Green

  • Channel status: Green

  • Module diagnostics: Green/Red DIAG LED

Potential Separation & Isolation

• Between channels: No

• Between channels and backplane bus: Yes

• Isolation tested: 707 V DC

Safety & Standards

• Suitable for safety functions: No

Ambient Conditions

• Horizontal installation: -30 … 60 °C

• Vertical installation: -30 … 50 °C

• Max altitude: 5000 m above sea level

Dimensions & Weight

• Width × Height × Depth: 15 × 73 × 58 mm

• Weight: 31 g 

Technical Details