The ET 200SP, F DQ 8x24VDC0.5A PP HF 6ES7136 6DC00 0CA0 is a high-quality rack-mount industrial automation device designed for seamless integration into industrial settings. Its sleek yellow grey chassis blends well in any workspace, ensuring a reliable and efficient performance. Operating at a frequency of 50/60 Hertz (HZ), this product promises consistent output and durability. With a generous 1-year warranty, customers can rely on its performance for extended periods without concerns about malfunctions. Ideal for exporters, manufacturers, suppliers, and traders, this product is a versatile solution for various automation needs.

General information

• Product type designation: F-DQ 8x24 V DC/0.5 A PP HF

• Firmware version:
  

  • FW update possible: Yes

   

• Usable BaseUnits: BU type A0

• Color code for module plate: CC02

• Product function:
  

  • I&M data: Yes (I&M0 to I&M3)

Engineering with

• STEP 7 TIA Portal: V14 SP1 with HSP 202

• STEP 7: V5.5 SP4 HF5

• PROFINET GSD Revision: V2.31

Supply voltage

• Rated value (DC): 24 V

• Permissible range: 19.2 … 28.8 V

• Reverse polarity protection: Yes

• NEC Class 2 required: No

Input current

• Current consumption (rated): 75 mA (without load)

• Current from backplane bus: max. 21 mA

Output voltage / header

• Rated value (DC): 24 V

Power

• From backplane bus: 70 mW

• Power loss (typ.): 3 W

Address area

• Inputs: 6 bytes (5 bytes non-RIOforFA; 6 bytes RIOforFA)

• Outputs: 6 bytes (5 bytes non-RIOforFA; 6 bytes RIOforFA)

Hardware configuration

• Automatic encoding: Yes

• Electronic coding element type F: Yes

Digital outputs

• Type: Transistor

• Number of outputs: 8

• Parameterizable: Yes

• Short-circuit protection: Yes
  

  • Response threshold, typ.: min. 0.7 A

• Open-circuit detection: No

• Inductive shutdown limit: typ. –39 V

• Controlling a digital input: Yes (IEC 61131-2, type 0.5)

Switching capacity

• Resistive load: max. 0.5 A

• Lamp load: max. 2 W

Load resistance

• Lower limit: 48 Ω

• Upper limit: 12,000 Ω

Output voltage

• Signal "1" min.: 24 V; L+ (–0.5 V)

Output current

• Signal "1" rated: 0.5 A

• Signal "0" residual current max.: 0.5 mA

Switching frequency

• Resistive load: max. 30 Hz (symmetrical)

• Inductive load: max. 0.1 Hz (IEC 60947-5-1, DC-13)

• Capacitive load: max. 2 Hz (symmetrical)

• Lamp load: max. 10 Hz (symmetrical)

Total current of outputs

• Per channel max.: 0.5 A

• Per module max.: 3 A

Horizontal installation

— Up to 40 °C: 3 A
— Up to 50 °C: 2.5 A
— Up to 60 °C: 2 A

Vertical installation

— Up to 50 °C: 2 A

Cable length

• Shielded: max. 100 m

• Unshielded: max. 100 m

Diagnostics / status

• Diagnostics function: Yes

• Substitute values: No

Alarms

• Diagnostic alarm: Yes

LED indicators

• RUN (green)

• ERROR (red)

• PWR (green)

• Channel status (green)

• Channel diagnostics (red)

• Module diagnostics DIAG (green/red)

Potential separation

• Between channels: No

• Between channels and backplane bus: Yes

• Between channels and electronics supply: No

Isolation

• Tested with: 707 V DC

Standards / approvals

• Suitable for safety functions: Yes

Ecological footprint

• Environmental product declaration: Yes

• Global warming potential (total): 88.3 kg CO₂ eq

• Production: 13.1 kg

• Operation: 76.6 kg

• End of life: –1.37 kg

Highest safety class

• ISO 13849-1 PL: PLe

• IEC 61508 SIL: SIL 3

• Category: Cat. 4

Failure probability (20 years, repair 100 hrs)

• PFDavg (low demand): < 6.00E-05

• PFH (high demand / continuous): < 2.00E-09 1/h

Ambient conditions

• Operating temperature:
  

  • Horizontal: 0 … 60 °C
  • Vertical: 0 … 50 °C

• Max installation altitude: 4,000 m (with derating)

Dimensions

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

Weight

• Approx.: 48 g

FAQs of ET 200SP, F DQ 8x24VDC0.5A PP HF 6ES7136 6DC00 0CA0: