About

SINAMICS G120XA Rated power 2.2kW 3AC 380V -20% to 440V +10% Integrated class A C3 filter 110% 60s per 600s with integrated IOP-2 Integrated Fieldbus: MODBUS RTU, BACnet MS/TP, USS 6DI, 4DQ, 2AI, 2AQ, 1Mot_t Protection: IP20 Frame Size: FSA 232x73x209 (HxWxD) 

SINAMICS G120XA Datasheet

Article No.: 6SL3220-3YD16-0CB0
Technical data may change. Values may differ from rating plate.

General Information

Rated Data

Input

• Phases: 3 AC

• Line voltage: 380 … 440 V (+10% / -20%)

• Line frequency: 47 … 63 Hz

• Rated current (LO): 5.3 A

Output

• Phases: 3 AC

• Rated voltage: 400 V

• Rated power (LO): 2.2 kW

• Rated current (IN): 5.6 A (400 V / 380 V)

• Max. output current: 6.2 A

• Pulse frequency: 4 kHz

• Output frequency (vector control): 0 … 240 Hz

• Output frequency (V/f control): 0 … 550 Hz

Overload Capability

• LO: 110% for 60 s in a 600 s cycle

General Technical Specifications

• Power factor λ: 0.75 … 0.93

• cos φ: 0.99

• Efficiency: 0.97

• Sound pressure level: 55 dB (1 m)

• Power loss: 0.088 kW

• Filter class: RFI suppression, Category C3

• EMC category: With accessories, Category C3

• STO (Safe Torque Off): Not available

Communication

• Supported: USS, Modbus RTU, BACnet MS/TP

Inputs / Outputs

Digital Inputs

• Standard: 6

• Threshold 0→1: 11 V

• Threshold 1→0: 5 V

• Max inrush current: 15 mA

Fail-safe Digital Inputs

• Quantity: 0

Digital Outputs

• Relay outputs: 4 (DC 30 V / 1 A)

• Transistor outputs: None

Analog / Digital Inputs

• Quantity: 2 (Differential)

• Resolution: 12 bit

• Digital threshold: 0→1: 4 V, 1→0: 1.6 V

Analog Outputs

• Quantity: 2 (Non-isolated)

PTC / KTY Interface

• Supported sensors: PTC, KTY, PT1000, Thermo-Click

• Accuracy: ±5 °C

Closed-loop Control Techniques

• V/f linear / square-law / parameterizable

• V/f with FCC

• V/f ECO

• Sensorless vector control

• Not supported: Vector with sensor, torque control with encoder

• Supported: Encoderless torque control

Ambient Conditions

• Board coating: Class 3C2 (IEC 60721-3-3)

• Cooling: Air via integrated fan

• Cooling air requirement: 0.005 m³/s

• Installation altitude: up to 1,000 m

• Operating temperature: -20 … 60°C

• Transport / Storage temperature: -40 … 70°C

• Humidity: Max. 95% at 40°C (no condensation/icing)

Connections

• Signal cable: 0.15 … 1.50 mm²

• Line side terminals: Screw, 1.50 … 2.50 mm²

• Motor end terminals: Screw, 1.50 … 2.50 mm²

• DC link PE: On housing with M4 screw

• Max motor cable length (shielded): 50 m

Mechanical Data

• Degree of protection: IP20 / UL open type

• Frame size: FSA

• Weight: 3.4 kg

• Dimensions: W 73 × H 232 × D 209 mm

Standards & Approvals

• CE, EAC, RCM, RoHS II

• CE: EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC

• Efficiency class: IE2

Operator Panel – IOP-2

• Display: LCD, color, 320 × 240 px

• Protection: IP55 / UL type 12

• Weight: 0.134 kg

• Dimensions: W 70 × H 106.85 × D 19.65 mm

• Operating temperature: 0 … 50°C (55°C with door installation kit)

• Storage / Transport: -40 … 70°C

• Max relative humidity: 95% at 25°C 

Technical Details