About SIEMENS G120C AC DRIVE-6SL3210-1KE22-6UB1

Data Sheet: SINAMICS G120C

Article No.: 6SL3210-1KE22-6UB1
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.

General Information

Rated Data

Input

• Number of phases: 3 AC

• Line voltage: 380 ... 480 V +10 % -20 %

• Line frequency: 47 ... 63 Hz

• Rated current (LO): 33.00 A

• Rated current (HO): 24.10 A

Output

• Number of phases: 3 AC

• Rated voltage: 400V IEC 480V NEC 1)

• Rated power (LO): 11.00 kW 15.00 hp

• Rated power (HO): 7.50 kW 10.00 hp

• Rated current (LO): 25.00 A

• Rated current (HO): 16.50 A

• Rated current (IN): 26.00 A

• Max. output current: 33.00 A

• Pulse frequency: 4 kHz

• Output frequency for vector control: 0 ... 240 Hz

• Output frequency for V/f control: 0 ... 550 Hz

Overload Capability

• Low Overload (LO): 150 % base load current IL for 3 s, followed by 110 % base load current IL for 57 s in a 300 s cycle time

• High Overload (HO): 200% base load current IH for 3 s, followed by 150% base load current IH for 57 s in a 300 s cycle time

General Tech. Specifications

• Power factor : 0.70 ... 0.85

• Offset factor cos : 0.95

• Efficiency : 0.97

• Sound pressure level (1m): 66 dB

• Power loss: 292.0 W

• Filter class (integrated): Unfiltered

Communication

• Communication: USS/MODBUS RTU

Inputs / Outputs

Standard Digital Inputs

• Number: 6

• Switching level: 01: 11 V, 10: 5 V

• Max. inrush current: 15 mA

Fail-safe Digital Inputs

• Number: 1

Digital Outputs

• Number as relay changeover contact: 1

• Output (resistive load): DC 30 V, 0.5 A

• Number as transistor: 1

• Output (resistive load): DC 30 V, 0.5 A

Analog / Digital Inputs

• Number: 1 (Differential input)

• Resolution: 10 bit

• Switching threshold as digital input: 01: 4 V, 10: 1.6 V

Analog Outputs

• Number: 1 (Non-isolated output)

PTC / KTY Interface

• 1 motor temperature sensor input, sensors that can be connected: PTC, KTY and Thermo-Click, accuracy 5 C

Closed-loop Control Techniques

• V/f linear / square-law / parameterizable: Yes

• V/f with flux current control (FCC): Yes

• V/f ECO linear / square-law: Yes

• Sensorless vector control: Yes

• Vector control, with sensor: No

• Encoderless torque control: No

• Torque control, with encoder: No

Ambient Conditions

• Cooling: Air cooling using an integrated fan

• Cooling air requirement: 0.018 m/s (0.636 ft/s)

• Installation altitude: 1,000 m (3,280.84 ft)

Ambient Temperature

• Operation: -10 ... 40 C (14 ... 104 F)

• Transport: -40 ... 70 C (-40 ... 158 F)

• Storage: -25 ... 55 C (-13 ... 131 F)

Relative Humidity

• Max. operation 95 % at 40 C (104 F), condensation and icing not permissible

Connections

• Signal cable: Conductor cross-section 0.15 ... 1.50 mm (AWG 24 ... AWG 16)

• Line side: Version Plug-in screw terminals; Conductor cross-section 6.00 ... 16.00 mm (AWG 10 ... AWG 6)

• Motor end: Version Plug-in screw terminals; Conductor cross-section 6.00 ... 16.00 mm (AWG 10 ... AWG 6)

• DC link (for braking resistor): Version Plug-in screw terminals; Conductor cross-section 6.00 ... 16.00 mm (AWG 10 ... AWG 6)

• Line length, max.: 15 m (49.21 ft)

• PE connection: On housing with M4 screw

• Max. motor cable length: Shielded 150 m (492.13 ft), Unshielded 150 m (492.13 ft)

Mechanical Data

• Degree of protection: IP20 / UL open type

• Frame size: FSC

• Net weight: 4.40 kg (9.70 lb)

Dimensions

• Width: 140 mm (5.51 in)

• Height: 295 mm (11.61 in)

• Depth: 203 mm (7.99 in)

Technical Details