SIEMENS PLC S7-1200 , 6ES7215-1BG40-0XB0

About SIEMENS PLC S7-1200 , 6ES7215-1BG40-0XB0

SIMATIC S7-1200, CPU 1215C, compact CPU, AC/DC/relay, 2 PROFINET ports, onboard I/O: 14 DI 24 V DC; 10 DO relay 2 A, 2 AI 0-10 V DC, 2 AO 0-20 mA DC, power supply: AC 85-264 V AC at 47-63 Hz, program/data memory 200 KB. 

Siemens SIMATIC S7-1200 CPU 1215C AC/DC/Relay

Part Number: 6ES7215-1BG40-0XB0

General Information:

• CPU Type: CPU 1215C AC/DC/Relay

• Firmware Version: V4.7

• Programming Software: STEP 7 V20 or higher

• Onboard I/O:

  • 14 DI 24 V DC

  • 10 DO Relay 2 A

  • 2 AI 010 V DC

  • 2 AO 020 mA DC

• Power Supply: AC 85264 V, 4763 Hz

• Program/Data Memory: 200 KB

Supply Voltage & Input Current:

• Rated AC voltage: 120/230 V

• Range: 85265 V AC

• Line frequency: 4763 Hz

• Current consumption: 100 mA @120 V AC; 50 mA @240 V AC

• Max current: 300 mA @120 V AC; 150 mA @240 V AC

• Inrush current: 20 A @ 264 V AC

Output & Encoder Supply:

• Backplane bus: 5 V DC, max. 1,600 mA

• Encoder supply: 24 V DC (20.428.8 V)

Power Loss: 14 W

Memory:

• Work memory: 200 KB (integrated)

• Load memory: 4 MB (integrated + SIMATIC Memory Card support)

• Backup: Yes, maintenance-free, no battery required

CPU Processing Times:

• Bit operation: 0.08 s/instruction

• Word operation: 1.7 s/instruction

• Floating point arithmetic: 2.3 s/instruction

CPU Blocks & Data Areas:

• Max blocks: 165,535 (DB, FC, FB, counters, timers)

• Retentive data area: 14 KB

• Flags: 8 KB

• Local data: 16 KB (priority class 1), 6 KB (priority classes 226)

Hardware Configuration:

• Max modules per system: 3 communication, 1 signal board, 8 signal modules

Digital Inputs:

• Number: 14 (6 usable for high-speed counting)

• Rated voltage: 24 V DC

• Input delay configurable, max 20 ms

• Max cable length: 500 m (shielded), 300 m (unshielded)

Digital Outputs:

• Number: 10 Relay outputs

• Max switching capacity: 2 A resistive load

• Output delay: 10 ms max

• Mechanical cycles: 10 million; electrical: 100,000 at rated load

• Cable length: 500 m shielded, 150 m unshielded

Analog Inputs:

• Number: 2

• Range: 010 V

• Input resistance: 100 k

• Max cable length: 100 m shielded

Analog Outputs:

• Number: 2

• Range: 020 mA

• Resolution: 10 bit

• Conversion time: 625 s/channel

Encoders:

• Connectable: 2-wire sensor

Interfaces:

• PROFINET: 2 ports, integrated switch

• Protocols: PROFINET IO Controller/Device, SIMATIC communication, Open IE, Web server, Media redundancy

• Transmission rate: 100 Mbit/s

• PG/OP communication with TLS V1.3

• Max IO Devices: 16 (prioritized startup supported)

Additional Protocols:

• PROFIBUS (with CM 1243-5/1242-5), OPC UA (Server), MODBUS, AS-Interface

• Ethernet: TCP/IP, SNMP, DCP, LLDP

Diagnostics & Control:

• LEDs: RUN/STOP, ERROR, MAINT

• Counters: 6 (max frequency 100 kHz)

• Frequency measurement, PID control, positioning axes (max 8), alarm inputs: 4

• Diagnostic buffer and traces supported (2 traces, max 512 KB each)

EMC & Protection:

• EMC standards: IEC 61000-4-2/4-4/4-5/4-6, EN 55011

• IP degree: IP20

• User access & program protection: Password, block protection, write/read protection

• Max users: 42, groups: 14, roles: 20

Ambient Conditions:

• Operation: -20 C to 60 C (horizontal), -20 C to 50 C (vertical)

• Storage: -40 C to 70 C

• Altitude: -1,000 m to 5,000 m

• Humidity: up to 95 % RH, non-condensing

• Vibration: 2 g wall, 1 g DIN rail

• Shock: 15 g, 11 ms half-sine

Dimensions & Weight:

• Width: 130 mm, Height: 100 mm, Depth: 75 mm

• Weight: 550 g 

Technical Details