About SIMATIC PNPN Coupler 6ES7158-3AD10-0XA0

Manufacturer SeriesS7 ET 200 CPU BRAND SIEMENS STEP 7 TIA Portal configurable/integrated from version STEP 7 V15.1 or higher MODEL NAME / NUMBER6ES7158-3AD10-0XA0Product type designation PN/PN coupler SIMATIC PN/PN Coupler for deterministic data exchange between max.4 PN-Controller per subnet, also from sub net to sub net, PROFI safe data exchange, I/O-, MSI-, MSO- and data record communication, redundant power supply, PN-connection via SIMATIC Bus Adapter (BA), delivery w/o Bus Adapter 

Siemens SIMATIC PN/PN Coupler

Product Type: PN/PN Coupler
Purpose: Deterministic data exchange between up to 4 PN-Controllers per subnet, also between subnets. Supports PROFIsafe, I/O, MSI, MSO, and data record communication. Redundant power supply.

Delivery: Without SIMATIC BusAdapter (BA)

General Information

• Firmware update possible: Yes

• I&M Data: Yes (I&M0 to I&M3)

• Isochronous Mode: No

• Tool Changer Support: Yes (Docking station and docking unit)

• Local Coupling IO Data:

  • Number of coupling modules: 16

  • Number of coupling submodules per module: 4 (1x write, 3x read)

• Local Coupling Data Records:

  • Number of coupling modules: 16

  • Submodules per module: 4 (1x write, 3x read)

  • Max record length: 4096 bytes

  • FIFO depth in storage mode: 8

• Engineering: STEP 7 TIA Portal V15.1 or higher

• PROFINET GSD Version: V2.3

Installation

• Mounting: 7.5 mm and 15 mm DIN rail

Supply Voltage

• Rated Voltage: 24 V DC

• Permissible Range: 19.2 28.8 V DC

• Reverse Polarity Protection: Yes

• Mains buffering: 10 ms

Input Current

• Max current (right-hand supply terminal): 360 mA (19.2 V input, including 2 plugged BA 2x LC)

• Max current (left-hand supply terminal): 320 mA

• Inrush current (max): 1.6 A

• It: 0.031 As

Power Loss

• Typical: 4 W (for 24 V and 2 plugged BA 2x LC)

• Additional per optical interface: 750 mW

Address Area

• Per module: Max. 254 bytes (inputs 254, outputs 253)

• Per station: Max. 1440 bytes

• Max submodules per station: 116

Interfaces

• PROFINET Interfaces: 2 (1 per line side)

• Optical Interface: Yes (via BusAdapter)

• Transmission Rate: Max 100 Mbit/s

Interface Details

• Ports: 2 via BusAdapter

• Integrated Switch: Yes

• Compatible BusAdapters:

  • BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA SCRJ/RJ45, BA SCRJ/FC, BA 2x LC, BA LC/RJ45, BA LC/FC

Protocols Supported

• PROFINET IO Device

• Open IE communication (TCP/IP, SNMP, LLDP, ping, ARP)

• Media redundancy: MRP, MRPD

• PROFINET System Redundancy (S2)

• H-Sync forwarding

Diagnostics / Status

• RUN LED: Green

• ERROR LED: Red

• MAINT LED: Yellow

• LINK LED: 2x green (on BusAdapter)

• Power Monitoring LED (PWR): Green

• Diagnostics Function: Parameterizable

Potential Separation & Isolation

• Between supply voltage and electronics: Yes

• Between Ethernet and electronics: Yes

• Isolation tested: 707 V DC

Ambient Conditions

• Operating Temperature: -30 C to 60 C (horizontal); max 50 C (vertical)

• Installation Altitude: Max 5000 m (restrictions above 2000 m)

Mechanics / Material

• Strain Relief: Optional for RJ45 and FC BusAdapter

• Dimensions: W 100 mm H 117 mm D 74 mm (with DIN rail)

• Weight: 200 g (without BusAdapter) 

Technical Details