About SITOP Basic Power Supplies - 6EP1333-3BA10

SITOP PSU200M 24V/5A (6EP1333-3BA10)

• Type: Stabilized power supply
• Input: 1- or 2-phase AC
• Output: 24 V DC, 5 A

Input Specifications

• Input voltage 1: 120 230 V AC

• Input voltage 2: 230 500 V AC

• Wide range input: Yes

• Input voltage tolerance: 85 264 V (input 1), 176 550 V (input 2)

• Line frequency: 47 63 Hz

• Inrush current max: 35 A

• Overvoltage/overload capability: 1300 Vpeak, 1.3 ms

Output Specifications

• Output voltage: 24 V DC, adjustable 24 28.8 V

• Output current: 0 5 A

• Rated power: 120 W (typical)

• Residual ripple max: 50 mV

• Voltage peak max: 200 mV

• Overshoot at switch-on: ~3 %

• Response delay max: 1 s

• Short-circuit protection: Yes, constant current 56 A or latching shutdown

• Parallel operation: Up to 2 units

• Efficiency: 88 %

• Power loss: 17 W at rated output

Protection & Monitoring

• Overvoltage protection: < 35 V

• Galvanic isolation between input and output: Yes

• Output short-circuit proof: Yes

• Display:

  • Green LED: 24 V OK

  • Yellow LED: Overload

  • Red LED: Latching shutdown

Safety & Standards

• Protection class: IP20

• Safety class: Class I

• EMC standards: EN 55022 Class B, EN 61000-6-2

• Approvals: CE, UL/cULus, CSA, UKCA, EAC, BIS, Shipbuilding (ABS, DNV)

Mechanical Data

• Dimensions: 70 125 121 mm (W H D)

• Mounting: DIN rail EN 60715 357.5/15 mm

• Weight: 0.6 kg

• Required spacing: 50 mm top/bottom, 0 mm sides

Ambient Conditions

• Operating temperature: -25 +70 C

• Storage/transport temperature: -40 +85 C

• Environmental class: IEC 60721, 3K3, 5 95 % RH, no condensation

Technical Details