SIEMENS ET 200SP, DI 4x 120..230VvAC ST 6ES7131 6FD01 0BB1

The ET 200SP, DI 4x 120..230VvAC ST 6ES7131 6FD01 0BB1 is a high-quality industrial automation product in Grey color. It operates at a frequency of 50/60 Hertz (HZ) and comes with a 1-year warranty. This product is designed to meet the needs of exporters, manufacturers, suppliers, and traders with its reliable performance and versatile applications.

SIMATIC ET 200SP Digital Input Module

Article No.: 6ES7131-6FD01-0BB1

• Type: DI 4x120230 V AC Standard, Type 3 (IEC 61131)
• Packing Unit: 1 piece, fits BU-type B1
• Colour Code: CC41
• Module Diagnostics: Yes

General Information

• Product type designation: DI 4x120 230 V AC ST

• HW functional status: FS04

• Firmware version: V0.0 (FW update not possible)

• I&M data: Yes (I&M0 to I&M3)

• Suitable for PROFINET R1 IMs: Yes

• Engineering:

  • STEP 7 TIA Portal V14 or higher

  • STEP 7 V5.5 SP3

  • PROFIBUS: GSD file Revision 3+

  • PROFINET: GSDML V2.3

Operating Mode

• Digital Input (DI): Yes

• Counter, Oversampling, MSI: No

Supply Voltage

• Rated value: 230 V AC

• Permissible upper limit: 264 V AC

• Reverse polarity protection: No

Current Consumption

• Rated: 10 mA

Encoder Supply

• Number of outputs: 4

• Short-circuit protection: No (use 10 A fuse with BU type B1)

• Output current (max at 60 C): 10 A

Power Loss

• Typical: 1 W (all inputs connected, 230 V, 50 Hz)

Address Area

• Max per module: 1 byte (+1 byte for QI info)

Hardware Configuration

• Automatic encoding: Yes

• Mechanical coding element: Type C

• BaseUnit compatibility: 1-wire, 2-wire, 3-wire, 4-wire (with potential distributor module)

Digital Inputs

• Number of inputs: 4

• Parameterizable: Yes

• Input characteristic: IEC 61131 Type 3

• Input voltage:

  • "0": 040 V AC

  • "1": 74264 V AC

• Typical input current for "1": 10.8 mA

• Input delay:

  • "0" "1": 1.54 ms

  • "1" "0": 10 ms

• Max cable length:

  • Shielded: 1,000 m

  • Unshielded: 600 m

Encoder

• 2-wire sensor supported: Yes

Diagnostics / Status

• PWR LED (green) for supply voltage monitoring: Yes

• Channel status display (green LED): Yes

• Module diagnostics LED (green/red DIAG): Yes

• Monitoring of supply voltage, wire-break, short-circuit: No

Potential Separation / Isolation

• Between channels: No

• Between channels and backplane bus: Yes

• Between channels and electronics power supply: No

• Isolation test: 2,545 V DC / 2 s

Standards / Safety

• Suitable for safety functions: No

Ambient Conditions

• Operating temperature (horizontal): -30 60 C

• Operating temperature (vertical): -30 50 C

• Max installation altitude: 2,000 m (higher on request)

Dimensions & Weight

• Width: 20 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: 36 g 

FAQs of ET 200SP, DI 4x 120..230VvAC ST 6ES7131 6FD01 0BB1: