About SIEMENS ET 200SP, DI 8xNAMUR HF 6ES7131-6TF00-0CA0

Manufacturer SeriesS7 ET 200 CPU BRAND SIEMENS Firmware versionV2.0 or higher STEP 7 TIA Portal configurable/integrated from versionV19MODEL NAME/NUMBER 6ES7131-6TF00-0CA0 SIMATIC ET 200SP, digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics 

Data Sheet 6ES7131-6TF00-0CA0

SIMATIC ET 200SP | Digital Input Module | DI 8 NAMUR High Feature

BU Type A0 | Color Code CC01 | Channel Diagnostics

General Information

• Product type: DI 8x NAMUR HF

• Hardware functional status: From FS21

• Firmware version: V2.0 or higher

• Firmware update possible: Yes

• Usable BaseUnits: BU type A0

• Color code: CC01

• Supports I&M data: I&M0 to I&M3

• Isochronous mode: No

• Suitable for PROFINET R1 IMs: Yes

Engineering

• STEP 7 TIA Portal: from V19

• STEP 7: from V5.5 SP3

• PROFIBUS GSD: Revision 5

• PROFINET GSDML: V2.42

Operating Modes

• Digital input: Yes

• Counter mode: Yes

• Oversampling: No

• MSI: No

Supply Voltage

• Rated value (DC): 24 V

• Range: 19.228.8 V

• Reverse polarity protection: Yes

Input Current

• Max. current consumption: 70 mA

Encoder Supply

• Number of outputs: 8

• Short-circuit protection: Yes

24 V Encoder Supply

• 24 V output: No

• Short-circuit protection: No

NAMUR Encoder Supply

• Voltage: 8.2 V

• Short-circuit protection: Yes

• Max. current per channel: 8 mA

• Max. current per module: 64 mA

Power Loss

• Typical: 1.5 W

Address Area

• Max. address space per module: 1 byte

• Inputs:

  • DI mode: 1 byte + 1 byte QI

  • Counter mode: 42 bytes

• Outputs:

  • DI mode: 0 bytes

  • Counter mode: 20 bytes

Hardware Configuration

• Automatic encoding: Yes

• Mechanical coding:

  • Available: Yes

  • Type: A

• Number of configurable submodules: 1

BaseUnit Compatibility

• 2-wire connection: BU type A0

• 3-wire connection: BU type A0

Digital Inputs

• Number of inputs: 8 (NAMUR)

• Parameterizable: Yes

• Pulse extension: 0.5 s, 1 s, 2 s

• Edge evaluation: Rising / Falling / Both

• Signal flutter detection: 2 to 32 changes

• Flutter observation window: 0.5 s100 s

Counter Function

• Max. counters: 4

• Max. frequency: 5 kHz

• Width: 32-bit

• Direction: Up/Down

Input Voltage & Current (NAMUR)

• Rated voltage: 8.2 V

For switched contact (10 k)

• Signal "0": 0.351.2 mA

• Signal "1": 2.17 mA

For unswitched contact

• Signal "0": 0.5 mA

• Signal "1": approx. 8 mA

Input Delay

• Changeover contacts (tolerated): 300 ms

• NAMUR inputs:

  • 0 1: 20 ms

  • 1 0: 20 ms

Cable Length

• Shielded cable: Up to 200 m

• In Counter mode: Up to 50 m

Connectable Encoders

• NAMUR encoder (EN 60947): Yes

• Single contact / changeover (unconnected): Yes

• Single contact with 10 k: Yes

Diagnostics

• Diagnostic functions: Yes

• Diagnostic alarm: Yes

• Hardware interrupt: Yes (channels 07)

• Supply voltage monitoring: Yes

• Wire break: Yes

• Short circuit: Yes

LED Indicators

• PWR LED (green): Supply monitoring

• Channel LED (green): Status

• Channel LED (red): Diagnostics

• Module LED (green/red): DIAG

Isolation / Protection

• Isolation tested: 707 V DC

• Potential separation:

  • Between channels: No

  • Between channels & backplane bus: Yes

  • Channels & L+: Yes

  • Channels & electronics supply: Yes

Ambient Conditions

• Operating temperature:

  • Horizontal: 3060C

  • Vertical: 3050C

• Max altitude: 5000 m
  (Derating above 2000 m)

Mechanical Data

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: Approx. 32 g 

Technical Details