About SIEMENS ET 200SP, F-PM-E PPM, 24V DC 6ES7136-6PA00-0BC0

Manufacturer SeriesS7 ET 200 CPU BRAND SIEMENS Product type designation F-PM-E 24 V DC/8 A PPM STSTEP 7 TIA Portal configurable/integrated from versionV12MODEL NAME/NUMBER6ES7136-6PA00-0BC0SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig. output PPM 

Siemens SIMATIC DP POWER MODULE

F-PM-E 24 V DC / 8 A PPM ST (PROFIsafe) for ET 200SP

Function: Safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3

General Information

• Product type designation: F-PM-E 24 V DC / 8 A PPM ST

• BaseUnit type: C0

• Color code: CC52 (for module identification)

• I&M data: Yes (I&M0 to I&M3)

Engineering / Configuration

• STEP 7 TIA Portal: Configurable from V12

• STEP 7: Configurable from V5.5 SP3

• PROFINET: GSD version V2.31

Supply Voltage

• Rated value: 24 V DC

• Permissible range: 20.4 28.8 V DC

• Reverse polarity protection: Yes

• Current consumption: 75 mA (without load), max 21 mA from backplane bus

Outputs / Encoder Supply

• Rated voltage: 24 V DC

• Encoder outputs: 2, short-circuit protected (0.72.1 A)

• Output current: Max 0.3 A per channel (up to 60C)

• Total encoder current: Max 600 mA

• Power consumption from backplane: 70 mW

• Power loss: Typ. 5 W

Address Area

• Inputs: 7 bytes

• Outputs: 5 bytes

Digital Inputs

• Number of inputs: 2

• Type: Source/sink, P-reading, DC 24 V

• Signal range: 0: -30+5 V, 1: +15+30 V

• Input current (1): Typ. 3.7 mA

• Input delay: 0.420 ms (parametrizable)

• Max cable length: Shielded 1,000 m / Unshielded 500 m

Digital Outputs

• Number of outputs: 1

• Switching capacity: Resistive load max 8 A, Lamp max 100 W

• Overload & short-circuit protection: Yes

• Open-circuit detection: Yes (typ. 8 mA)

• Inductive shutdown voltage limit: Max -1.5 V

• Switching frequency: Resistive 10 Hz, Inductive 0.1 Hz, Lamp 4 Hz

• Cable length: Shielded 1,000 m / Unshielded 500 m

• Total current per module/channel: 8 A

Diagnostics / Status

• Diagnostics function: Yes

• LEDs:

  • RUN: Green

  • ERROR: Red

  • PWR: Green

  • Channel status: Green

  • Channel diagnostics: Red

  • Module diagnostics: Green/Red (DIAG)

• Substitute values connectable: No

Potential Separation & Isolation

• Between channels: No

• Channels and backplane: Yes

• Isolation test: 707 V DC (type test)

Safety & Certifications

• Suitable for safety functions: Yes

• Performance level (ISO 13849-1): PLe

• SIL (IEC 61508): SIL 3

• PROFIsafe: Supported

• Environmental product declaration: Yes

• Global warming potential (CO2 eq):

  • Total: 88.3 kg

  • Production: 13.1 kg

  • Operation: 76.6 kg

  • After end of life: -1.37 kg

Ambient Conditions

• Operating temperature:

  • Horizontal: 060 C

  • Vertical: 050 C

Dimensions & Weight

• Width: 20 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: 70 g 

Technical Details