Siemens 6ep1334 2ba20

The Siemens 6EP1334-2BA20 is a polished grey-colored power supply unit designed for various applications including computers, telephones, and Ethernet cables. With a frequency of 50 Hertz and a rated voltage of 230 Volt, this standard-sized power supply unit is suitable for a wide range of electronic devices. It comes with a 1-year warranty and is ideal for businesses involved in exporting, manufacturing, supplying, and trading of electronic products. 

SITOP PSU100S 24 V / 10 A Stabilized Power Supply

Article No.: 6EP1334-2BA20

Input: 1-phase AC (120 / 230 V)
Output: 24 V DC / 10 A

Input Specifications

• Supply Voltage: 120 / 230 V AC (automatic range selection)

• Input Voltage Range:

  • 85 132 V AC

  • 170 264 V AC

• Line Frequency: 47 63 Hz

• Input Current:

  • 120 V AC 4.49 A

  • 230 V AC 1.91 A

• Inrush Current: max. 60 A at 25 C

• Fuse Protection: T 6.3 A / 250 V (not accessible)

• Recommended Circuit Breaker: 10 A, C characteristic

Output Specifications

• Output Voltage: 24 V DC, adjustable via potentiometer: 22.8 28 V

• Relative Overall Tolerance: 3 %

• Ripple: max. 150 mV, typical 20 mV

• Peak Voltage: max. 240 mV, typical 160 mV

• Response Delay: max. 0.3 s

• Voltage Rise Time: typical 20 ms

• Output Current: 10 A (rated), 0 12 A allowable (derating above 45 C)

• Short-Circuit / Overload Protection: Constant current limiting, 12 14.6 A

• Parallel Operation: Yes, up to 2 units

• Efficiency: 90 %

• Power Loss: typ. 25 W

Protection & Safety

• Overvoltage Protection: Vout < 33 V in case of internal fault

• Short-Circuit Proof: Yes

• Galvanic Isolation: Yes (input/output)

• Protection Class: IP20

• Operating Resource Protection Class: Class I

• Leakage Current: max. 3.5 mA

EMC / Standards

• Emission: EN 55022 Class B

• Harmonics: EN 61000-3-2

• Immunity: EN 61000-6-2

• Certifications: CE, UL, CSA, UKCA, EAC, BIS, CB

Ambient Conditions

• Operating Temperature: -25 +70 C (natural convection)

• Storage / Transport Temperature: -40 +85 C

• Relative Humidity: 5 95 %, no condensation

Mechanical Data

• Connection: Screw terminals

  • Input L, N, PE: 0.5 2.5 mm

  • Output +, -: 0.5 2.5 mm

  • Alarm / signaling contacts: 0.5 2.5 mm

• Dimensions: 70 125 120 mm (W H D)

• Installation Width Mounting Height: 70 mm 225 mm

• Required Spacing: Top/Bottom: 50 mm, Left/Right: 0 mm

• Mounting: DIN rail EN 60715

• Net Weight: 0.8 kg

Display / Signaling

• Green LED: 24 V OK

• Relay Contact (NO): 60 V DC / 0.3 A

Accessories

• Electrical: Buffer module

• Mechanical: Device ID label 20 7 mm

FAQs of Siemens 6ep1334 2ba20: