The Siemens ET200SP 8AI Module (Model: 6ES7134-6GF00-0AA1) is a cutting-edge solution for industrial automation systems, designed for seamless integration and dependable performance. Featuring a compact design with dimensions of 15 x 73 x 58 mm and lightweight construction at just 31 grams, this module is optimized for space-constrained environments. With its rack-mountable configuration and durable matte grey finish, it ensures hassle-free installation and enduring functionality. Operating across a temperature range of -30C to +60C with a humidity tolerance of up to 95%, it offers robust performance in demanding industrial settings. Powered by a 24V DC rated voltage with an input current of 25mA, the module ensures efficient, low-power operation with minimal power loss of 0.7W. Additionally, its IP20 protection level guarantees operational safety in standard industrial applications. Designed to handle a frequency range of 50/60 Hz and a single-phase connection, the module delivers reliable functionality. Enhanced by a high DC isolation voltage of 707V, it protects critical systems from electrical interference. This product is backed by a 1-year warranty, ensuring peace of mind for quality-conscious users.

Siemens 6ES7134-6GF00-0AA1 ET 200SP Analog Input Module (AI 8xI 2-/4-Wire Basic, 16-bit)

• Module: AI 8xI (2-/4-wire), Basic
• Suitable for: BU Type A0, A1
• Color Code: CC01
• Resolution: 16-bit
• Diagnostics: Yes

General Information

• Product designation: AI 8xI 2-/4-wire BA

• HW status: FS21

• Firmware version: V1.0.1

• Firmware update: Yes

• Usable BaseUnits: BU A0, A1

• Isochronous mode: No

• Measuring range scalable: No

Engineering Compatibility

• TIA Portal: V13 SP1 or higher

• STEP 7: V5.5 SP3 or higher

• PROFIBUS: GSD Revision 3 & 5+

• PROFINET: GSDML V2.3

Operating Mode & CiR

• Oversampling: No

• MSI: No

• Reparameterization in RUN: No

• Calibration in RUN: No

Supply Voltage

• Rated value: 24 V DC

• Range: 19.2 28.8 V

• Reverse polarity protection: Yes

Input Current

• Max current consumption: 25 mA (without sensor supply)

Encoder Supply (24 V)

• 24 V supply: Yes

• Short-circuit protection: Yes

• Max output current: 0.7 A (total all channels)

Power Loss

• Typical: 0.7 W (without sensor supply)

Address Area

• Max per module: 16 bytes

Hardware Configuration

• Automatic encoding: Yes

• Mechanical coding: Yes (Type A)

• Supported connection:

  • 1-wire: BU A0, A1

  • 2-wire: BU A0, A1

  • 4-wire: BU A0, A1 + potential distributor

Analog Inputs

• Number of inputs: 8 (single-ended)

• Input type: Current

• Max permissible input current: 50 mA

• Cycle time per channel: 1 ms (min)

Input Ranges

• 020 mA, 100 , 15-bit

• 2020 mA, 100 , 16-bit

• 420 mA, 100 , 15-bit

Cable Length

• Shielded: max 200 m

Analog Value Processing

• Resolution: 16-bit

• Integration time: Parameterizable

• Interference suppression: 16.67 / 50 / 60 / 4800 Hz

• Conversion time per channel:
  180 / 60 / 50 / 0.625 ms
  (values in brackets for alternatives: 67.5 / 22.5 / 18.75 ms)

Smoothing (Digital Filtering)

• Levels: 4

• Settings: None / Low / Medium / High

Encoder Compatibility

• Voltage measurement: No

• Current measurement:

  • 2-wire transmitter (max burden 650 )

  • 4-wire transmitter supported

Errors and Accuracy

• Linearity: 0.01%

• Temperature error: 0.005%/K

• Crosstalk: 50 dB

• Repeat accuracy at 25C: 0.05%

• Operational error (full temp range): 0.5%

• Basic error at 25C: 0.3%

Interference Suppression

• Series mode interference: 70 dB
  (40 dB with shorter conversion times)

Diagnostics & Indicators

• Supply voltage monitoring: Yes

• Wire-break (420 mA): Yes

• Short-circuit (sensor supply): Yes

• Group error: Yes

• Overflow/underflow: Yes

LED Indicators

• PWR LED: Green

• Channel status: Green

• Diagnostics (module): Green/Red

• Channel diagnostics: No

Potential Separation

• Between channels: No

• Channels Backplane bus: Yes

• Channels Electronics supply: No

Isolation Test: 707 V DC

Environmental Conditions

• Operating temperature:

  • Horizontal: 30 to +60C

  • Vertical: 30 to +50C

• Max installation altitude: 5000 m

Dimensions & Weight

• Width: 15 mm

• Height: 73 mm

• Depth: 58 mm

• Weight: 31 g

Technical Details 

FAQs of Siemens ET200SP 8AI Module: