Siemens PLC IO Module ET200S 6ES7134-4GB11-0AB0 About

SIMATIC DP, Electronics module f. ET200S, 2AI Standard I-4DMU 15 mm width, +/-20mA; 13 bit+sign 4.. 20mA; 12-bit for 4-wire transmitter Cycle time 65 ms/channel with SF LED (group fault) 

Data sheet 6ES7134-4GB11-0AB0

Spare part SIMATIC DP, Electronics module f. ET200S, 2AI Standard I-4DMU 15 mm width, +/-20mA; 13 bit+sign 4.. 20mA; 12-bit for 4-wire transmitter
Cycle time 65 ms/channel with SF LED (group fault)

General information

Product function

• Isochronous mode: No

Supply voltage

Load voltage L+

• Rated value (DC): 24 V; From power module

Input current

• from load voltage L+ (without load), max.: 30 mA

• from backplane bus 3.3 V DC, max.: 10 mA

Power loss

• Power loss, typ.: 0.6 W

Address area

Address space per module

• Address space per module, max.: 4 byte

Analog inputs

• Number of analog inputs: 2

• permissible input current for current input (destruction limit), max.: 40 mA

• Cycle time (all channels): max. Number of active channels per module basic conversion time

Input ranges (rated values), currents

• -20 mA to +20 mA: Yes; 50 Ohm

• 4 mA to 20 mA: Yes; 50 Ohm

Cable length

• shielded, max.: 200 m

Analog value generation for the inputs

Measurement principle: integrating

Integration and conversion time/resolution per channel

• Resolution with overrange (bit including sign), max.:

  • 14 bit; 20 mA: 14 bit

  • 4 to 20 mA: 13 bit

• Integration time (ms): 16.7 / 20 ms

• Interference voltage suppression for interference frequency f1 in Hz: 50 / 60 Hz

• Conversion time (per channel): 65 ms; 55 / 65 ms

Smoothing of measured values

• parameterizable: Yes; In four stages by means of digital filtering

• Step: None: Yes; 1 cycle time

• Step: low: Yes; 4 cycle time

• Step: Medium: Yes; 32 cycle time

• Step: High: Yes; 64 cycle time

Errors/accuracies

Operational error limit in overall temperature range

• Current, relative to input range, (+/-): 0.6 %

Basic error limit (operational limit at 25 C)

• Current, relative to input range, (+/-): 0.4 %

Interrupts/diagnostics/status information

Diagnoses

• Wire-break: Yes; Measuring range 4 to 20 mA only

• Group error: Yes

• Overflow/underflow: Yes

Diagnostics indication LED

• Group error SF (red): Yes

Parameter

• Remark: 4 byte

• Diagnostics wire break: Disable / enable (only in measuring range 4 to 20 mA)

• Group diagnostics: Disable / enable

• Overflow/underflow: Disable / enable

Potential separation

Potential separation analog inputs

• between the channels: No

• between the channels and backplane bus: Yes

• Between the channels and load voltage L+: No

Isolation

• Isolation tested with: 500 V DC

Dimensions

• Width: 15 mm

• Height: 81 mm

• Depth: 52 mm

Weights

• Weight, approx.: 40 g 

Technical Details