About Siemens PLC IO Module ET200S 6ES7134-4GD00-0AB0

Siemens PLC IO Module ET200S 6ES7134-4GD00-0AB0 is a new industrial-grade module designed for efficient electronic control systems. This grey module comes with a 1-year warranty and operates on electric power. With a standard size, this module is suitable for various industrial applications, ensuring reliable performance and seamless integration into existing systems. 

Data Sheet Siemens 6ES7134-4GD00-0AB0

SIMATIC DP, ET 200S 4AI Standard I (2-wire), 420 mA, 13-bit

General Information

• Module type: Electronics module ET 200S

• Channels: 4 analog inputs (2-wire)

• Signal type: 420 mA

• Resolution: 13 bit

• Width: 15 mm

• Cycle time: 40 ms (for all channels)

• SF LED: Yes (Group Fault)

• Isochronous mode: No

Supply Voltage

• Load voltage L+: 24 V DC (from power module)

• Reverse polarity protection: Yes

Input Current

• From load voltage L+ (no load): max. 125 mA

• From backplane bus (3.3 V DC): max. 10 mA

Transmitter Supply

• Integrated supply available: Yes

• Short-circuit proof: Yes (approx. 200 mA per module)

Power Loss

• Typical: 0.6 W

Address Area

• Max. address space: 8 bytes per module

Analog Inputs

• Number of inputs: 4

• Max. input current (limit): 30 mA (electronically limited)

• Cycle time: 3340 ms

• Input range: 420 mA (into 25 )

• Cable length (shielded): max. 200 m

Analog Value Processing

• Measurement principle: Integrating

• Resolution: 13 bit (including sign)

• Integration time: 16.67 ms / 20 ms

• Interference suppression: 50/60 Hz

Smoothing (Filter)

Parameterizable in 4 stages:

• None: 1 cycle time

• Low: 4 cycle time

• Medium: 16 cycle time

• High: 32 cycle time

Accuracy

• Operational error (full temperature range): 0.4%

• Basic error (at 25 C): 0.3%

Diagnostics

• Wire break: Yes (15 V range only)

• Group diagnostics: Yes

• Overflow/Underflow: Yes

• LED: SF (red)

Parameter bytes:

• Total: 7 bytes

• Wire break: 1

• Group diagnostics: 1

• Overflow/underflow: 1

Isolation / Potential Separation

• Between channels: No

• Channels backplane bus: Yes

• Channels load voltage L+: No

• Isolation test: 500 V DC

Mechanical Data

• Width: 15 mm

• Height: 81 mm

• Depth: 52 mm

• Weight: approx. 40 g 

Technical Details