SIEMENS PLC MODULES 6ES7155-6AR00-0AN0 About

SIEMENS PLC MODULES 6ES7155-6AR00-0AN0 is a highly advanced communication module designed for the SIMATIC S7-1500 PLC system. This module is essential for high-speed and reliable communication between the PLC and other devices within industrial automation networks. The SIEMENS PLC MODULES 6ES7155-6AR00-0AN0 provides excellent performance for data exchange and control systems, ensuring smooth communication even in complex industrial setups. It supports fast and accurate signal transfer, making it ideal for use in industries requiring precise automation and control. Designed to integrate seamlessly with the SIMATIC S7-1500 PLC, the SIEMENS PLC MODULES 6ES7155-6AR00-0AN0 is suitable for a wide range of applications, including manufacturing automation, process control, and more. For more information on the specifications and pricing of SIEMENS PLC MODULES 6ES7155-6AR00-0AN0, contact Naksh Technology Solution LLP, your trusted distributor of Siemens PLC products. 

SIMATIC ET 200SP IM 155-6PN Basic

Article No.: 6ES7155-6AR00-0AN0
Module Type: PROFINET Interface Module, Basic
Max. I/O Modules: 12
Integrated Ports: 2x RJ45

General Information

• HW Functional Status: FS04

• Firmware Version: Yes; FW update possible

• I&M Data: Yes; I&M0 to I&M3

• Hot Swapping: Yes; Single hot swapping

• Isochronous Mode: No

• Engineering Software:

  • STEP 7 TIA Portal V13 SP1 and above

  • STEP 7 V5.5 SP4

• PROFINET GSDML Version: V2.31

• Configuration Control: via dataset

Supply Voltage

• Rated Value: 24 V DC

• Permissible Range: 19.2 28.8 V DC

• Reverse Polarity Protection: Yes

• Short-Circuit Protection: Yes

• Mains Buffering: 5 ms stored energy

Current & Power

• Max Current Consumption: 300 mA

• It: 0.09 As

• Typical Power Loss: 1.8 W

Address Area

• Per Module: Max. 32 bytes (input/output each)

• Per Station: Max. 32 bytes

Hardware Configuration

• Max ET 200SP Modules: 12

• Max ET 200AL Modules: 0

Interfaces

• PROFINET Interfaces: 1 (2-port switch)

• Interface Type: RJ45, integrated switch

• Protocols Supported: PROFINET IO Device, Open IE, MRP client

• Transmission: 100 Mbit/s Full Duplex (100BASE-TX), Autonegotiation, Autocrossing

Unsupported Protocols: PROFIBUS, EtherNet/IP, Modbus TCP, PROFI safe

Diagnostics & Status

• LED Indicators:

  • RUN (Green)

  • ERROR (Red)

  • MAINT (Yellow)

  • PWR (Green)

  • LINK TX/RX (2x Green)

• Diagnostics Function: Yes

• Alarms: Yes

Potential Separation & Isolation

• Between PROFINET & other circuits: Yes; 1500 V AC (type test)

• Backplane Bus & Electronics: No

• Supply & Other Circuits: No

• Isolation Tested: 707 V DC

Environmental Conditions

• Operation Temperature (Horizontal): -30 60 C

• Operation Temperature (Vertical): -30 50 C

• Altitude: Max. 5,000 m above sea level

Physical Data

• Width: 35 mm

• Height: 117 mm

• Depth: 74 mm

• Weight: 125 g 

Technical Details