SINAMICS G120X Rated power: 11 kW At 110% 60s, 100% 240 s Unfiltered 380-480 V 3 AC +10/-20% 47-63 Hz Ambient temperature -20 to +45 Degree C Size: FSC Degree of protection IP20 / UL open type painting 3C2 With Intelligent Operator Panel Without IO expansion Fieldbus integrated: PROFINET PN, Ethernet IP 

Data Sheet: SINAMICS G120X

Article No.: 6SL3220-3YE26-0UF0

Technical data are subject to change! There may be discrepancies between calculated and rating plate values.

Rated Data

Input

• Number of phases: 3 AC

• Line voltage: 380 ... 480 V +10 % -20 %

• Line frequency: 47 ... 63 Hz

• Rated voltage: 400V IEC, 480V NEC

• Rated current (LO): 24.50 A (IEC), 21.30 A (NEC)

• Rated current (HO): 18.25 A (IEC), 14.00 A (NEC)

Output

• Number of phases: 3 AC

• Rated voltage: 400V IEC, 480V NEC

• Rated power (LO): 11.00 kW, 15.00 hp

• Rated power (HO): 7.50 kW, 10.00 hp

• Rated current (LO): 26.00 A (IEC), 21.00 A (NEC)

• Rated current (HO): 18.00 A (IEC), 14.00 A (NEC)

• Rated current (IN): 27.00 A

• Max. output current: 35.00 A

• Pulse frequency: 4 kHz

• Output frequency for vector control: 0 ... 200 Hz

• Output frequency for V/f control: 0 ... 550 Hz

Overload Capability

• Low Overload (LO): 110 % base load current IL for 60 s in a 300 s cycle time

• High Overload (HO): 150 % x base load current IH for 60 s within a 600 s cycle time

General Technical Specifications

• Power factor : 0.70 ... 0.85

• Offset factor cos : 0.96

• Efficiency : 0.98

• Sound pressure level (1m): 67 dB

• Power loss: 0.344 kW

• Filter class (integrated): Unfiltered

• EMC category (with accessories): without

• Safety function "Safe Torque Off": without SIRIUS device (e.g., via S7-1500F)

Communication

• Communication: PROFINET, EtherNet/IP

Inputs / Outputs

Standard Digital Inputs

• Number: 6

• Switching level 0 1: 11 V

• Switching level 1 0: 5 V

• Max. inrush current: 15 mA

Fail-safe Digital Inputs

• Number: 1

Digital Outputs

• Number as relay changeover contact: 2

• Output (resistive load): DC 30 V, 5.0 A

• Number as transistor: 0

Analog / Digital Inputs

• Number: 2 (Differential input)

• Resolution: 10 bit

• Switching threshold as digital input:

  • 0 1: 4 V

  • 1 0: 1.6 V

Analog Outputs

• Number: 1 (Non-isolated output)

PTC / KTY Interface

• Motor temperature sensor input: 1 motor temperature sensor input, sensors that can be connected: PTC, KTY, and Thermo-Click, accuracy 5 C

Closed-Loop Control Techniques

• V/f linear / square-law / parameterizable: Yes

• V/f with flux current control (FCC): Yes

• V/f ECO linear / square-law: Yes

• Sensorless vector control: Yes

• Vector control with sensor: No

• Encoderless torque control: No

• Torque control with encoder: No

Ambient Conditions

• Standard board coating type: Class 3C2, according to IEC 60721-3-3:2002

• Cooling: Air cooling using an integrated fan

• Cooling air requirement: 0.018 m/s (0.653 ft/s)

• Installation altitude: 1,000 m (3,280.84 ft)

Ambient Temperature

• Operation: -20 ... 45 C (-4 ... 113 F)

• Transport: -40 ... 70 C (-40 ... 158 F)

• Storage: -25 ... 55 C (-13 ... 131 F)

Relative Humidity

• Max. operation: 95 % at 40 C (104 F), condensation and icing not permissible

Connections

• Signal cable: Conductor cross-section 0.15 ... 1.50 mm (AWG 24 ... AWG 16)

• Line side: Screw-type terminal, 1.50 ... 16.00 mm (AWG 16 ... AWG 6)

• Motor end: Screw-type terminals, 1.50 ... 16.00 mm (AWG 16 ... AWG 6)

• DC link (for braking resistor) PE connection: On housing with M4 screw

• Max. motor cable length:

  • Shielded: 150 m (492.13 ft)

  • Unshielded: 300 m (984.25 ft)

Mechanical Data

• Degree of protection: IP20 / UL open type

• Frame size: FSC

• Net weight: 7.14 kg (15.74 lb)

• Dimensions:

  • Width: 140 mm (5.51 in)

  • Height: 295 mm (11.61 in)

  • Depth: 218 mm (8.58 in)
    
    

FAQs of SIEMENS VFD G120X 6SL3220-3YE26-0UF0: