About SIMATIC PNMF coupler multi-fieldbus 6ES7158-3MU10-0XA0

 Manufacturer SeriesS7 1500Communication ProtocolsRS232Mounting Type Rack Mount Pulse Transmission Output with 100 Mbit/s full duplex (100BASE-TX)Output Type SIMATIC PN/MF Coupler SIMATIC PN/MF coupler multi-fieldbus coupler, PN IO, Ether Net/IP, for deterministic data exchange between max. 1 controller per side, redundant current infeed, Ethernet connection via SIMATIC Bus Adapter (BA), supplied without Bus Adapter 

SIMATIC PN/MF Coupler Multi-Fieldbus Coupler

Article No.: 6ES7158-3MU10-0XA0

Purpose: Deterministic data exchange between max. 1 controller per side, redundant current infeed.Ethernet connection: Via SIMATIC Bus Adapter (BA), supplied without Bus Adapter.

General Information

• Product type: PN/MF Coupler

• Firmware version: V5.0.1 (FW update possible)

• Vendor ID: 002AH

• Device ID: 0604H

• ODVA Manufacturer ID: 04E3H

• ODVA Device ID: 0FA0H

Product Functions

• I&M data: I&M0 to I&M3

• Isochronous mode: No

• Tool changer: Yes (Docking station/unit)

• Local coupling (IO data & data records): No

Engineering

• STEP 7 TIA Portal: V16 or higher (via HSP of PN/PN coupler V4.2+ in compatibility mode)

• PROFINET GSD version: V2.3

Installation / Mounting

• Mounting rail: 7.5 mm or 15 mm

Supply Voltage

• Rated: 24 V DC

• Permissible range: 19.2 28.8 V DC

• Reverse polarity protection: Yes

• Mains buffering: 10 ms

Electrical Data

• Current consumption (max): 360 mA (19.2 V at right-hand supply, 2 plugged BA)

• Inrush current (max): 1.6 A

• Power loss (typ.): 4 W (24 V, 2 plugged BA 2x RJ45)

Address Area

• Per module: Max. 254 bytes (inputs/outputs)

• Per station: Max. 1,440 bytes

Hardware Configuration

• Max. submodules per station: 16

Interfaces

PROFINET

• 2 interfaces (1 per line side)

• BusAdapter compatible: BA 2x RJ45, BA 2x FC, BA 2x M12

• Integrated switch: Yes

• Media redundancy: Yes (MRP client, max. 50 nodes)

• Protocols: PROFINET IO Device, Open IE

EtherNet/IP

• CIP Implicit Messaging: Yes

• CIP Explicit Messaging: Yes

• CIP Safety: No

• Requested Packet Interval (RPI): 2 ms

Diagnostics / Status

• LEDs: RUN (green), ERROR (red), MAINT (yellow), LINK (green x2), PWR (green), NS (green/red), MS (green/red), IO (red/green/yellow)

• Status indicator: Yes

• Alarms: Yes

• Diagnostics function: Parameterizable

Potential Separation / Isolation

• Between supply voltage and electronics: Yes

• Between Ethernet and electronics: Yes

• Isolation tested: 707 V DC

Ambient Conditions

• Operating temperature: -30 60 C (horizontal), -30 50 C (vertical)

• Altitude: Max. 5,000 m

• Condensation: No

Mechanical Data

• Strain relief: Optional (for RJ45/FC BusAdapter)

• Dimensions: W 100 H 117 D 74 mm

• Weight: Approx. 200 g (without BusAdapter) 

Technical Details