SIEMENS ET 200SP, DQ 4x24..230VAC2A ST 6ES7132-6FD00-0BB1

About SIEMENS ET 200SP, DQ 4x24..230VAC2A ST 6ES7132-6FD00-0BB1

Manufacturer SeriesS7 ET 200 CPU BRAND SIEMENS MODEL NAME/NUMBER6ES7132-6FD00-0BB1Product type designation DQ 4x24 ... 230 V AC/2 A ST STEP 7 TIA Portal configurable/integrated from versionV13 / V13SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard suitable for BU type B1, Color code CC41, Module diagnostics

Siemens SIMATIC ET 200SP Digital Output Module

Part Number: 6ES7132-6FD00-0BB1

General Information:

• Module Type: DQ 4x 24230 V AC / 2 A Standard

• Hardware Functional Status: FS05

• Firmware Version: V1.0 (FW update possible)

• BaseUnit Compatibility: BU type B1

• Color Code: CC41

• I&M Data: Yes (I&M0 to I&M3)

• Isochronous Mode: No

Engineering / Software:

• STEP 7 TIA Portal: V13 or higher

• STEP 7: V5.5 SP3 or higher

• PROFIBUS: GSD Revision 5

• PROFINET: GSDML V2.3

Operating Mode:

• DQ: Yes

• DQ with Energy-Saving Function: No

• PWM / Oversampling / MSO: No

Supply Voltage:

• Rated Value: 230 V AC

• Permissible Range: 20.4 264 V AC

• Current Consumption: 11.5 mA

Digital Outputs:

• Type: Triac with zero-point detection

• Number of Outputs: 4

• Current-Sinking: No

• Current-Sourcing: Yes

• Short-Circuit Protection: No (requires 10 A fuse when using BU type B1)

• Controlling a Digital Input: Yes

• Size of Motor Starters (NEMA): Max 5

• Switching Capacity:

  • Resistive Load: Max 2 A

  • Lamp Load: Max 100 W

• Output Voltage (Signal 1): Min 20.4 V

• Output Current (Signal 1): Rated 2 A, Min 10 mA, Max 2 A

• Residual Current (Signal 0): Max 460 A

• Output Delay (Resistive Load): 0 1: Max 10 ms, 1 0: Max 10 ms

• Parallel Switching: Redundant control of a load: Yes

• Switching Frequency: Resistive Load: Max 10 Hz, Inductive Load: Max 0.5 Hz, Lamp Load: Max 1 Hz

• Total Current per Module (Horizontal / Vertical Installation):

  • Up to 40C: 8 A / 6 A

  • Up to 50C: 6 A / 4 A

  • Up to 60C: 4 A /

Cable Length:

• Shielded: Max 1,000 m

• Unshielded: Max 600 m

Diagnostics / Status Indication:

• Diagnostics Function: No

• Substitute Values Connectable: Yes

• Diagnostic Alarm: No

• Group Error: Yes

• PWR LED (Supply Voltage): Green

• Channel Status LED: Green

• Module Diagnostics LED: Green/Red

Potential Separation & Isolation:

• Between Channels: No

• Between Channels and Backplane Bus: Yes

• Isolation Tested: 2,545 V DC / 2 s

Ambient Conditions:

• Operating Temperature (Horizontal / Vertical): -30C to 60C

• Max Installation Altitude: 2,000 m above sea level (higher on request)

Dimensions & Weight:

• Width x Height x Depth: 20 x 73 x 58 mm

• Weight: Approx. 50 g 

Technical Details