About SIEMENS VFD G120XA 6SL3220-3YD50-0CB0

SINAMICS G120XA Rated power 160kW 3AC 380V -20% to 440V +10% Integrated class A C3 filter 110% 60s per 600s with integrated IOP-2 Integrated Fieldbus: MODBUS RTU, BACnet MS/TP, USS 6DI, 4DQ, 2AI, 2AQ, 1Mot_t Protection: IP20 Frame Size: FSG 999.4x305x360 (HxWxD) 

Data Sheet: SINAMICS G120XA

Article No.: 6SL3220-3YD50-0CB0
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.

General Information

Rated Data

Input

• Number of phases: 3 AC

• Line voltage: 380 ... 440 V +10 % -20 %

• Line frequency: 47 ... 63 Hz

• Rated current (LO): 278.00 A

Output

• Number of phases: 3 AC

• Rated voltage: 400 V

• Rated power IEC 400V (LO): 160.00 kW

• Rated current 400V (IN): 289.00 A

• Rated current 380V (IN): 292.00 A

• Rated current (LO): 289.00 A

• Max. output current: 318.00 A

• Pulse frequency: 2 kHz

• Output frequency for vector control: 0 ... 240 Hz

• Output frequency for V/f control: 0 ... 550 Hz

Overload Capability

• Low Overload (LO): 110% base load current IL for 60 s in a 600 s cycle time

• Max. output current: Max. output current for 60 s in a 600 s cycle time

General Tech. Specifications

• Power factor : 0.75 ... 0.93

• Power factor cos : 1 0.99

• Efficiency : 0.98

• Sound pressure level (1m): 74.9 dB

• Power loss: 3.190 kW

• Filter class (integrated): RFI suppression filter for Category C3

• EMC category (with accessories): Category C3

• Safety function "Safe Torque Off": without SIRIUS device (e.g., via S7-1500F)

Communication

• Communication: USS, Modbus RTU, BACnet MS/TP

Inputs / Outputs

Standard Digital Inputs

• Number: 6

• Switching level: 0 1: 11 V, 1 0: 5 V

• Max. inrush current: 15 mA

Fail-safe Digital Inputs

• Number: 0

Digital Outputs

• Number as relay changeover contact: 4

• Output (resistive load): DC 30 V, 1.0 A

• Number as transistor: 0

Analog / Digital Inputs

• Number: 2 (Differential input)

• Resolution: 12 bit

• Switching threshold as digital input: 0 1: 4 V, 1 0: 1.6 V

Analog Outputs

• Number: 2 (Non-isolated output)

PTC / KTY Interface

• 1 motor temperature sensor input, sensors that can be connected: PTC, KTY, PT1000 and Thermo-Click, accuracy 5 C

Closed-loop Control Techniques

• V/f linear / square-law / parameterizable: Yes

• V/f with flux current control (FCC): Yes

• V/f ECO linear / square-law: Yes

• Sensorless vector control: Yes

• Vector control, with sensor: No

• Encoderless torque control: Yes

• Torque control, with encoder: No

Ambient Conditions

• Standard board coating type: Class 3C2, according to IEC 60721-3-3:2002

• Cooling: Air cooling using an integrated fan

• Cooling air requirement: 0.210 m/s (7.416 ft/s)

• Installation altitude: 1,000 m (3,280.84 ft)

Ambient Temperature

• Operation: -20 ... 60 C (-4 ... 140 F)

• Transport / Storage: -40 ... 70 C (-40 ... 158 F)

Relative Humidity

• Max. operation 95 % at 40 C (104 F), condensation and icing not permissible

Connections

• Signal cable: Conductor cross-section 0.15 ... 1.50 mm (AWG 24 ... AWG 16)

• Line side: Version M10 screw; Conductor cross-section 35.00 ... 2 x 185.00 mm (AWG 1 ... MCM 2 x 350)

• Motor end: Version M10 screw; Conductor cross-section 35.00 ... 2 x 185.00 mm (AWG 1 ... MCM 2 x 350)

• DC link (for braking resistor): PE connection M10 screw

• Max. motor cable length (shielded): 150 m (492.13 ft)

Mechanical Data

• Degree of protection: IP20 / UL open type

• Frame size: FSG

• Net weight: 105 kg (231.49 lb)

Dimensions

• Width: 305 mm (12.01 in)

• Height: 999 mm (39.33 in)

• Depth: 360 mm (14.17 in)

Technical Details