SIMATIC S7-1500 6ES7522-5HF00-0AB0

SIMATIC S7-1500 6ES7522-5HF00-0AB0 About

General Information

• Product Type: DQ 8x230 V AC / 5 A ST (Relay)

• HW Functional Status: FS02

• Firmware Version: V2.1.0 (FW update possible)

• Channels: 8, in groups of 1

• Diagnostics: Yes (Substitute value: switching cycle counter)

• Safety Functions:

  • Supports safety-oriented shutdown of load groups up to SIL1 (EN IEC 62061:2021)

  • Category 2 / PL c (EN ISO 13849-1:2015)

• Front Connector: To be ordered separately (screw terminals or push-in)

Engineering & Programming

• STEP 7 TIA Portal: from V12

• STEP 7: from V5.5 SP3

• PROFIBUS GSD Version: V1.0 / V5.1

• PROFINET GSD Version: V2.3

Operating Mode

• DQ: Yes

• MSO (Multiple Signal Output): Yes

• Integrated Operating Cycle Counter: Yes (FW V2.1.0 or higher)

• Prioritized Startup: Yes

Supply Voltage & Power

• Rated Value: 24 V DC

• Permissible Range: 19.228.8 V DC

• Reverse Polarity Protection: Yes

• Max Current Consumption: 80 mA

• Backplane Bus Power Consumption: 0.8 W

• Power Loss (typ.): 5 W

Digital Outputs

• Type: Relays

• Number of Outputs: 8

• Current-Sinking / Sourcing: Yes

• Parameterizable: Yes

• Short-Circuit Protection: No

• Controlling a Digital Input: Yes

• Motor Starter Size (NEMA): Max. 5

• Switching Capacity:

  • Lamp load: max. 1,500 W (10,000 cycles)

  • Low-energy/fluorescent lamps: 10 58 W (25,000 cycles)

  • Conventional fluorescent: 1 58 W (25,000 cycles)

  • Uncompensated fluorescent: 10 58 W (25,000 cycles)

• Output Current:

  • Rated: 5 A per channel

  • Min: 5 mA / 10 V

  • Max (thermal continuous): 8 A

  • Residual current for signal "0": 0 A

• Parallel Switching:

  • Logic links: Yes

  • Redundant control: Yes

• Switching Frequency:

  • Resistive load: 2 Hz

  • Inductive load: 0.5 Hz

  • Lamp load: 2 Hz

• Total Current:

  • Per channel: max. 8 A

  • Per group: max. 8 A

  • Per module: max. 64 A

Relay Outputs

• Number: 8

• Relay Coil Voltage (L+): 24 V DC

• Coil Current (typ.): 80 mA

• Operating Cycles (max.): 4,000,000

• Relay Approval: UL 508 (250 V AC / 5 A g.p., 120 V AC TV-4 tungsten)

• Cable Length:

  • Shielded: max. 1,000 m

  • Unshielded: max. 600 m

Diagnostics & LEDs

• Diagnostics Function: Yes

• Substitute Values Connectable: Yes

• Alarms: Diagnostic alarm, Maintenance interrupt

• Voltage Monitoring: Yes

• Wire-break / Short-circuit Detection: No

• Status LEDs:

  • RUN: Green

  • ERROR: Red

  • MAINT: Yellow

  • PWR: Green

  • Channel Status: Green

Potential Separation & Isolation

• Between Channels: Yes (different phases permitted, groups of 1)

• Between Channels and Backplane Bus: Yes

• Between Channels and Load Voltage L+: Yes

• Permissible Potential Difference: 250 V AC (500 V AC for different phases)

• Isolation Tested:

  • Between channels: 3,100 V DC

  • Channels & backplane bus: 3,100 V DC

  • Channels & L+: 3,100 V DC

  • L+ & backplane bus: 707 V DC

Standards, Approvals & Ecological

• Safety Functions: Yes, up to PL c / SIL 1 / Cat. 2

• Siemens Eco Profile (SEP): Yes

• Global Warming Potential (CO eq):

  • Total: 43.8 kg

  • Production: 9.5 kg

  • Operation: 34.5 kg

  • End-of-life: -0.231 kg

• Approvals: KC, FM, NK, CCS

Ambient Conditions

• Horizontal Installation: -30 C to 60 C (From FS03)

• Vertical Installation: -30 C to 40 C

• Storage / Transport: Not specified

Dimensions & Weight

• Width: 35 mm

• Height: 147 mm

• Depth: 129 mm

• Weight: ~350 g 

Technical Details