About SIEMENS VFD G120XA 6SL3220-3YD56-0CB0

SINAMICS G120XA Rated power 315kW 3AC 380V -20% to 440V +10% Integrated class A C3 filter 110% 60s per 600s with integrated IOP-2 Integrated Fieldbus: MODBUS RTU, BACnet MS/TP, USS 6DI, 4DQ, 2AI, 2AQ, 1Mot_t Protection: IP20 Frame Size: FSH 1487.5x548x410 (HxWxD)  

SINAMICS G120XA

Article No.: 6SL3220-3YD56-0CB0
High-Power AC Drive 3-phase input/output

Rated Data

Input

• Phases: 3 AC

• Line voltage: 380440 V (+10% / 15%)

• Line frequency: 4763 Hz

• Rated current (LO): 617 A

Output

• Phases: 3 AC

• Rated voltage: 400 V

• Rated power IEC 400 V (LO): 315 kW

• Rated current:

  • 400 V: 582.62 A

  • 380 V: 605 A

  • LO: 568 A

• Max. output current: 770 A

• Pulse frequency: 2 kHz

• Output frequency:

  • Vector control: 0100 Hz

  • V/f control: 0100 Hz

Overload Capability

• Low Overload (LO): 110% base load current for 60 s in 600 s cycle

General Technical Specifications

• Power factor : 0.750.93

• Power factor cos : 1 0.99

• Efficiency : 0.98

• Sound pressure level (1 m): 72.9 dB

• Power loss (typical): 6.89 kW

• Filter class: Integrated RFI suppression filter, Category C3

• EMC category (with accessories): Category C3

• Safety function: Safe Torque Off without SIRIUS device (via S7-1500F)

Communication

• USS, Modbus RTU, BACnet MS/TP

Inputs / Outputs

• Standard digital inputs: 6

  • Switching levels: 0 1 = 11 V, 1 0 = 5 V

  • Max inrush current: 15 mA

• Fail-safe digital inputs: 0

• Digital outputs (relay): 4 (DC 30 V, 1 A)

• Transistor outputs: 0

• Analog/differential inputs: 2 (12-bit resolution)

  • Switching threshold: 0 1 = 4 V, 1 0 = 1.6 V

• Analog outputs: 2 (non-isolated)

• PTC/KTY interface: 1 motor temperature sensor input (PTC, KTY, PT1000, Thermo-Click), accuracy 5 C

Closed-Loop Control Techniques

• V/f linear / square-law / parameterizable: Yes

• V/f with flux current control (FCC): Yes

• V/f ECO linear / square-law: Yes

• Sensorless vector control: Yes

• Vector control with sensor: No

• Encoderless torque control: Yes

• Torque control with encoder: No

Ambient Conditions

• Standard board coating: Class 3C2 (IEC 60721-3-3:2002)

• Cooling: Air cooling with integrated fan

• Cooling air requirement: 0.345 m/s

• Installation altitude: 1,000 m

• Ambient temperature:

  • Operation: 060 C

  • Transport: 4070 C

  • Storage: 2555 C

• Relative humidity: Max 95% at 40 C, no condensation or icing

Connections

• Signal cable: 0.151.50 mm

• Line side: M12 screw, 2 240 mm

• Motor end: M12 screw, 4 240 mm

• DC link (for braking resistor) / PE: M12 screw

• Max. motor cable length (shielded): 100 m

Mechanical Data

• Degree of protection: IP20 / UL open type

• Frame size: FSH

• Net weight: 132 kg

• Dimensions (W H D): 548 1,487 410 mm

Standards & Efficiency

• Compliance: CE, EAC, RCM, RoHS II

• CE marking: EMC Directive 2004/108/EC, Low-Voltage Directive 2006/95/EC

• Converter losses (IEC61800-9-2): Efficiency class IE2

• Power loss (typical): 2.536.89 kW depending on load

Operator Panel (IOP-2)

• Display: LCD color, 320 240 pixels

• Degree of protection: IP55 / UL type 12

• Net weight: 0.134 kg

• Dimensions (W H D): 70 106.85 19.65 mm

• Ambient temperature: 050 C (operation), 55 C with door installation kit

• Storage / Transport: 4070 C

• Max. operation humidity: 95%